Welcome to ScapeCrunch

We are ScapeCrunch, the place where planted aquarium hobbyists come to build relationships and support each other. When you're tired of doom scrolling, you've found your home here.

Journal UNS 60L High Tech Countertop Build

  • Thread starter Thread starter ample
  • Start date Start date
  • Tagged users Tagged users None
Joined
Feb 24, 2026
Messages
67
Reaction score
132
Location
Houston, TX
Uh oh! Made the leap and purchased a UNS 60L aquarium today to replace my UNS 5N. It's going to go on the edge of my kitchen island, so keeping equipment minimal and attractive is going to be a priority here.

The aesthetic goal is something resembling an Iwagumi that can be viewed from 270 degrees. Biggest inspiration currently is this scape by @qball_aquatics in Sydney. I'm not a huge Iwagumi person and I normally like substantial hardscape, but something about the plant selection here scales so perfectly in this long shallow tank, so I'm simply going to copy it.



UNS 60L Dimensions: 24" x 8" x 8"

Tentative Equipment List
Filter: Oase Filtosmart 60
Inflow/outflow: ASG 10mm Stainless Steel Inflow/Outflow pipes
Light: Chihiros CII RGB or ONF Flat Nano - intentionally going for a short light for more of a spotlight effect with shadowing on the outer edges
CO2: Paintball setup, potentially mounted horizontally with brackets under the counter

Plants:
Glosso or HC carpet
Eleocharis parvula for height around the stones
Echinodorus 'Aflame" centerpiece plant

Livestock:
Blue dream neocaridina
Maybe chili rasboras

How does this setup sound? Very open to suggestions.
 
Last edited:
IMG_0145.webp
IMG_0144.webp
Slowly gathering the supplies for this build.

The ASG stainless steel pipes arrived sooner than expected, and I’m pretty pleased with the quality. Works perfectly with the 9/12 Filtosmart 60 hoses.

My biggest gripe is that it doesn’t come with holders, and the ones they sell are both ugly and expensive for what it is, and I’m not finding any standalone holders for pipes this small. So this weekend’s project has been 3D printing some holders. So far we haven’t had any luck with the uploaded designs on Makerworld, so we’re just designing our own based on these simple FZone ones.
1780244658778.webp

We’re also having some issues with bothersome pests…

IMG_0140.webp
IMG_0143.webp

Once we get that sorted out, it’ll be time for hardscape and dark start. For now I’ve decided to go with the Chihiros CII RGB light, and a 2.5lb CO2 setup, after weighing the pros and cons of that versus a paintball setup. I can get a 2.5lb cylinder for $50, and my local beverage place that refills my 5lb for about $13 can also fill a 2.5lb.
 

Top 10 Trending Threads

Back
Top