Welcome to ScapeCrunch
We are ScapeCrunch, the place where planted aquarium hobbyists come to build relationships and support each other. When you're tired of doom scrolling, you've found your home here.
Social Feed
Supporting
I Donated 2026
AquaGirls
Tank: ADA 60F (60 cm x 30 cm x 25 cm) - 10.8 gallons
Lighting: Chihiros WRGB II Slim
Hardscape: Sensei Stone (Magura sandstone, with quartz and feldspar). GH, KH, pH neutral
Substrate: Crushed lava stone (to support hardscape), AF Lava Soil, and maybe Controsoil Extra fine? Still deciding
Filter: Oase Filtosmart 100 with Jardli 12/16 glass lily pipes (modified intake for shrimp)
CO2: GLA GRO Cartridge (once it is in stock)
Primary plants:
Livestock: Neocaridina Ocean Blue; maybe +/- a few Least Rasbora (Boraras urophthalmoides)
Still in the idea/planning stage of this tank. For a challenge I am pushing myself outside of my own comfort zone here, so this will be entirely new territory for me. Modern Iwagumi/diorama is not something I thought I would want to try, but my interest has grown in recent months, so why not give it a try? It will work, or it won’t. If it doesn’t work it’s always an excuse to rescape.
I have an ADA 60F tank sitting on my kitchen counter.
It was the first tank I purchased when I dunked my toes back into the hobby last year, that I scaped with some Ancient stone and driftwood for a few shrimp.
Once it was planted I quickly got in over my head on too many stems in the back, and moss growing too well on the rocks to maintain in a short, cramped space, and had some persistent CO2 related algae courtesy of a drifting needle valve. Thinking about rescaping the tank I had started to tear it down last week, removing most of the stems, and then found myself needing a temporary grow-out tank for some minnow fry, so the tank won’t be fully torn down and scaped for a few more weeks yet, but that gives me time to play around.
So, with an eye toward some sort of modern Iwagumi/diorama, I needed some hardscape. Without the luxury of walking into a store that caters to aquascapers, I am usually stuck with buying hardscape sight unseen. Rather than have a plan, and then try to find the materials, I ordered some rock to see what I would end up with, and let the hardscape inspire me.
Enter 55 lbs of Sensei stone in assorted shapes and sizes.
Why Sensei stone? I didn’t want to use Seiryu. It’s beautiful, easy to work with, and readily available, but I really needed this rock to be inert. Something in this tank’s original build sent GH and KH through the roof, and it had to be either the Controsand, or the or the ‘Ancient stone’ or both. I should have tested it in water first, and I learned that lesson the hard way. The 60F is a small and shallow tank, and shrimp loathe parameter swings, so this time I want to be able to control the water parameters a little more easily (especially the Ca/Mg ratios), so I am starting with inert rocks. Also, in case I wasn’t thrilled with the stones sent to me, I still wanted rocks that were easy to break into usable pieces, so no Hakkai stone this time. I did consider Frodo stone, but would like to use that in at least a 90P. So, hammer and cold chisel at the ready, Sensei turns out to have been a good choice.
The majority of the rocks were interesting either in color or texture, and reasonable in scale for a tank this size.
I did a quick speed-scape on Saturday afternoon with the majority of the larger stones, more for fit, and quickly ruled out some particularly chonky rocks. Thankfully, I saved the lid from the 60F tank when I ordered it, so it is currently my temporary dojo for now. I seriously need to build a real one, it is difficult to get much height in a cardboard lid!
My phone doesn't do it justice here, but Sensei has some interesting character, with neutral greys, and warmer tones that run throughout the rock due to insoluble iron deposits. I think it’s pretty flexible in that it is easy to pair with a variety of sands or soils quite easily. I could use something like WIO Rocket sand to bring out the greys, or Colorado sand to accentuate the warm reddish brown tones. For playing around purposes I just opened an extra bag of La Plata from the 150 build.
Not the all stone was well suited for use in a tank this size, though. That large stone center top in the image above is at least as thick as it is wide, and WAY too beefy and blocky to be useful, even if this was a 90P. Too many like that, and there would be no need for plants at all. It’s always difficult wanting to smash something you just purchased, but this morning I took a deep breath, and unleashed a hammer and cold chisel (honestly just the hammer works pretty darned well with with the strata in this stone) to see what I would end up with. Worse case scenario, I will end up with some accent gravel, because Sensei is difficult to match in color and texture with the accent gravels I have see out there.
What do you know…smashing it worked pretty well, and I much prefer the shards that I broke off that blocky rock. Much more pointy potential there. There are a couple of other odd shaped stones I would be willing to resculpt into a more useable shape, too. It is actually quite fun bashing rocks with a hammer first thing on a Monday morning. I am now looking forward to playing around some more with these rocks, and seeing if I can up the drama a bit. We’ll see what I ultimately end up with. I don’t think the shrimp will mind too much regardless.
Lighting: Chihiros WRGB II Slim
Hardscape: Sensei Stone (Magura sandstone, with quartz and feldspar). GH, KH, pH neutral
Substrate: Crushed lava stone (to support hardscape), AF Lava Soil, and maybe Controsoil Extra fine? Still deciding
Filter: Oase Filtosmart 100 with Jardli 12/16 glass lily pipes (modified intake for shrimp)
CO2: GLA GRO Cartridge (once it is in stock)
Primary plants:
- Eleocharis pusilla
- Micranthemum tweedii ‘Monte Carlo’
- Hemianthus callitrichoides (HC) 'Cuba
- Staurogyne repens
- Gratiola viscidula
- Riccardia Chamedryfolia
- +/- Myriophyllum guyana
Livestock: Neocaridina Ocean Blue; maybe +/- a few Least Rasbora (Boraras urophthalmoides)
Still in the idea/planning stage of this tank. For a challenge I am pushing myself outside of my own comfort zone here, so this will be entirely new territory for me. Modern Iwagumi/diorama is not something I thought I would want to try, but my interest has grown in recent months, so why not give it a try? It will work, or it won’t. If it doesn’t work it’s always an excuse to rescape.
I have an ADA 60F tank sitting on my kitchen counter.
It was the first tank I purchased when I dunked my toes back into the hobby last year, that I scaped with some Ancient stone and driftwood for a few shrimp.
Once it was planted I quickly got in over my head on too many stems in the back, and moss growing too well on the rocks to maintain in a short, cramped space, and had some persistent CO2 related algae courtesy of a drifting needle valve. Thinking about rescaping the tank I had started to tear it down last week, removing most of the stems, and then found myself needing a temporary grow-out tank for some minnow fry, so the tank won’t be fully torn down and scaped for a few more weeks yet, but that gives me time to play around.
So, with an eye toward some sort of modern Iwagumi/diorama, I needed some hardscape. Without the luxury of walking into a store that caters to aquascapers, I am usually stuck with buying hardscape sight unseen. Rather than have a plan, and then try to find the materials, I ordered some rock to see what I would end up with, and let the hardscape inspire me.
Enter 55 lbs of Sensei stone in assorted shapes and sizes.
Why Sensei stone? I didn’t want to use Seiryu. It’s beautiful, easy to work with, and readily available, but I really needed this rock to be inert. Something in this tank’s original build sent GH and KH through the roof, and it had to be either the Controsand, or the or the ‘Ancient stone’ or both. I should have tested it in water first, and I learned that lesson the hard way. The 60F is a small and shallow tank, and shrimp loathe parameter swings, so this time I want to be able to control the water parameters a little more easily (especially the Ca/Mg ratios), so I am starting with inert rocks. Also, in case I wasn’t thrilled with the stones sent to me, I still wanted rocks that were easy to break into usable pieces, so no Hakkai stone this time. I did consider Frodo stone, but would like to use that in at least a 90P. So, hammer and cold chisel at the ready, Sensei turns out to have been a good choice.
The majority of the rocks were interesting either in color or texture, and reasonable in scale for a tank this size.
I did a quick speed-scape on Saturday afternoon with the majority of the larger stones, more for fit, and quickly ruled out some particularly chonky rocks. Thankfully, I saved the lid from the 60F tank when I ordered it, so it is currently my temporary dojo for now. I seriously need to build a real one, it is difficult to get much height in a cardboard lid!
My phone doesn't do it justice here, but Sensei has some interesting character, with neutral greys, and warmer tones that run throughout the rock due to insoluble iron deposits. I think it’s pretty flexible in that it is easy to pair with a variety of sands or soils quite easily. I could use something like WIO Rocket sand to bring out the greys, or Colorado sand to accentuate the warm reddish brown tones. For playing around purposes I just opened an extra bag of La Plata from the 150 build.
Not the all stone was well suited for use in a tank this size, though. That large stone center top in the image above is at least as thick as it is wide, and WAY too beefy and blocky to be useful, even if this was a 90P. Too many like that, and there would be no need for plants at all. It’s always difficult wanting to smash something you just purchased, but this morning I took a deep breath, and unleashed a hammer and cold chisel (honestly just the hammer works pretty darned well with with the strata in this stone) to see what I would end up with. Worse case scenario, I will end up with some accent gravel, because Sensei is difficult to match in color and texture with the accent gravels I have see out there.
What do you know…smashing it worked pretty well, and I much prefer the shards that I broke off that blocky rock. Much more pointy potential there. There are a couple of other odd shaped stones I would be willing to resculpt into a more useable shape, too. It is actually quite fun bashing rocks with a hammer first thing on a Monday morning. I am now looking forward to playing around some more with these rocks, and seeing if I can up the drama a bit. We’ll see what I ultimately end up with. I don’t think the shrimp will mind too much regardless.
0 Replies
·
21 views
Staff member
I Donated 2026
Founding Member
Hi everyone!
I thought we would have more activity in this forum. I know back in the day, everyone was using shrimp to control algae especially the Yamatos.
Is that not a thing anymore?
Any shrimp-heads still out there? If so, what you got?
I thought we would have more activity in this forum. I know back in the day, everyone was using shrimp to control algae especially the Yamatos.
Is that not a thing anymore?
Any shrimp-heads still out there? If so, what you got?
38 Replies
·
5019 views
Journal 350 liter planted tank
Hello everybody im new here and wanted to introduce my tank,
The tank is a 350 liter Juwel rio (120x50x60)
Pretty high tank but wanted to have 50 cm wide
Lights: 3 daytime onex (1x plant 2x colour)
Good for 180 par at the bottom, 1.5 hour build up/5 hours full and 1.5 hour build off
Co2 by Inline with a co2art series pro dual stage regulator dropping 1.4 in ph
Filtration: 2 external filters (1x crystal profi 900, 1x tetra ex 1500 on a spraybar) and a eheim skim 350
Substrate: mastersoil black powder with masterline root tabs
Fertilizer: apt e
Fish: cherry barbels, siamese algae eaters, kuhli, ottociclus and some bloody mary shrimps
Plants: rotala macandra, anubias tinto, reineckii mini, reineckki rosenarvig, rotala blood red, ludwigia repens super red, bacopa carolinia, lobelia cardinalis, crypto flamingo, crypto rosen maiden, staurogene repens, spiralus tiger, ludwigia inclinata meta, samolus parvifloris red.
Might have forgotten something
Currently battling algae and unhappy plants due to nutrient inbalances and a no3 tester that was not correct.
Under a pic of the current state and the state it was a little better in balance (not as it should tho)
The tank is a 350 liter Juwel rio (120x50x60)
Pretty high tank but wanted to have 50 cm wide
Lights: 3 daytime onex (1x plant 2x colour)
Good for 180 par at the bottom, 1.5 hour build up/5 hours full and 1.5 hour build off
Co2 by Inline with a co2art series pro dual stage regulator dropping 1.4 in ph
Filtration: 2 external filters (1x crystal profi 900, 1x tetra ex 1500 on a spraybar) and a eheim skim 350
Substrate: mastersoil black powder with masterline root tabs
Fertilizer: apt e
Fish: cherry barbels, siamese algae eaters, kuhli, ottociclus and some bloody mary shrimps
Plants: rotala macandra, anubias tinto, reineckii mini, reineckki rosenarvig, rotala blood red, ludwigia repens super red, bacopa carolinia, lobelia cardinalis, crypto flamingo, crypto rosen maiden, staurogene repens, spiralus tiger, ludwigia inclinata meta, samolus parvifloris red.
Might have forgotten something
Currently battling algae and unhappy plants due to nutrient inbalances and a no3 tester that was not correct.
Under a pic of the current state and the state it was a little better in balance (not as it should tho)
56 Replies
·
3999 views
Hey folks, this marks the first time I've had more than one journal at a time, but I'm beginning work on a new 120x60 low-iron, rimless aquascape. I've been inspired by Hendy8888 and @Naturescapes_Rocco to try to make a really high quality stand. I have tried making a stand before, but it was a 2x4 stand with reclaimed wood facing, and it ended up looking pretty amateur. I'm trying to go high-end on this one in part because I want to be able to build cabinets for various projects around the house, and my wife will be less upset if I botch a fish tank stand than if I botch a new kitchen build.
I love seeing these stand builds, but they've always seemed somewhat under-documented to me. So this is starting from the very beginning - the design.
Under the influence of Rocco I did some 3d modeling for the tank. The pictures are a front view, one without the top sheet one, and one without the doors on. I used Shapr3d, which is free for one project. Let me know what you think of the design, and if there is anything I could work on!
I love seeing these stand builds, but they've always seemed somewhat under-documented to me. So this is starting from the very beginning - the design.
Under the influence of Rocco I did some 3d modeling for the tank. The pictures are a front view, one without the top sheet one, and one without the doors on. I used Shapr3d, which is free for one project. Let me know what you think of the design, and if there is anything I could work on!
95 Replies
·
7174 views
36gallon bowfront, fluval 407, inline co2, weekaqua p600 for lighting. Substrate is garden soil capped with blasting sand. I used ADA bacteria during cycling.
So this was my first time doing a dark start and it took about 6 weeks, when it seemed done it was testing 0ammonia 0 nitrites and 20ppm nitrate. Did a water change and planted. That was 4/5 days ago. Now I’m testing .25-1ppm ammonia and 0 nitrites and nitrates. What has happened? I added some stability this morning but I’m confused and wondering if I just wait because it needs to re cycle again?
4 Replies
·
57 views
Supporting
I Donated 2026
Rockstar
There are several threads discussing the new Aquael Hypermax 4500BT. I'm sure many would like some reports on it's performance over time. We have a thread discussing nano canister filters. We're all waiting for one of @Naturescapes_Rocco in depth write-ups discussing his filtration set-up. @Pepere and @*Ci* have unique set-ups as well, @Kwyet has used a matten filter, and we have several other members running sumps. That doesn't even include all those running sponge and HOB filters.
The idea is that we can consolidate a lot of filter information in one place making it easier to find rather than searching through so many threads. Maybe this won't work but I thought it was worth giving it a try. Perhaps it may be better listed as an article at some point.
I'm going to get things started by discussing factors I feel are most important to me when choosing a filter.
1) Filtration Performance: This goes without saying. The filter’s primary job is to keep our water clean and free of anything that harms the inhabitants. Of course, there are multiple factors that play into this. Some say flow is most critical, while others claim media volume is most important. Are there other factors? I still have limited experience, but my view, having done considerable reading, is that flow tends to be a bit overblown. You’ll see recommendations of anywhere from 4 to 10 times turnover rate with most leaning toward the higher end of that. I don’t think turnover rate is really the detail to be concerned about, at least with heavily planted tanks like are the norm here. I think the focus should be simply on ensuring flow achieves the goal of effectively moving water through the system to remove toxins/waste, delivering nutrients, and aiding gas (oxygen/CO2) transfer. If a turnover rate of 3 or 4 does that without dead spots in the tank, you should be good. After all, most of us here are plant focused and therefore, the fish we generally have are smaller community species that typically don’t care for high flow (there are, of course, exceptions).
I think there’s a simpler answer regarding media volume; more is better. Obviously, there must be a balance between internal volume and overall size of the filter. Real estate in and around our aquarium stands is precious. Filters like the Fluval FX6 and the newest Aquael Hypermax are huge. If you’re going for one of those, you’re likely putting it on a large tank with plenty of space underneath but again, it’s a matter of finding the right balance that provides the performance you need in a manageable size.
2) Reliability/Durability: This is where solid reviews come in handy and why getting feedback from users here is invaluable. Filtration performance becomes moot if the filter isn’t running, or worse yet, just flooded your house. Being able to easily source spare parts is also valuable, which is why sticking to the top well-known brands is often a safe route. It’s also why many aquarists place canister filters in protective containers, something else to consider when taking into account, size of filter. (this is something I should really do as I’ve had to clean up a few significant spills after filter maintenance and not getting the top secured in place properly
)
3) Tie – Maintenance/Noise Level: These two factors are equally important to me. If the filter is a pain to maintain, I’m going to put it off, and that’s bad. It affects the performance. But equally important to me is how noisy it is. I tend to be sensitive to annoying little sounds regardless of where I am; at home, in the car, at work, you name it. If the aquarium is in a part of the house I spend a lot of time in, well then, it’s even more important.
I don’t know if Oase was first to do it, but the idea of the prefilter was, I think, a game changer for many. I imagine it was derived from people installing foam filters on the intake pipes. Having an easily removable section with foam filters that catch a lot of large particles before entering the primary filter chamber is a great idea, resulting in expanded intervals between main filter head removals for cleaning.
Another aspect of maintenance is ease of priming. This could also be an aspect of performance but I don’t think it is quite as important. I’m not sure there is a canister filter that is truly or consistently easy to prime. Some may start out that way, but over time, become less and less so. This is an area I’d really like to see product designers put more serious thought. My experience so far is with Oase and the Fluval 07 series. Hated the Fuval priming and I’m just so-so with the Oase. Let me know your experience with priming other brands.
As for noise, I don’t mind the slight hum of an impeller as long as it’s steady and consistent, much the same way some people, including myself when I was younger, like the smooth steady sound of a fan at night to help them sleep. It’s when the sound becomes inconsistent, I’m bothered. I also don’t care for the sound of splashing/trickling water while I’m focused on other things. Only when I’m camping near the banks of a creek or other body of water is this OK
. This is one of the main reasons I’m not a fan of HOB filters. I’m also tweaking my CO2 reactor designs to minimize the bubble sounds of CO2 entering the reactor.
4) Cost: Let’s be clear, the cost doesn’t stop when you pay the retail price for the filter. There’s the cost of media and spare parts plus the cost of electricity. What’s the rated wattage of the filter. I see the Aquael filters claim to consume lower power and are therefore cheaper to run. What about special filter cartridges or foam. Is it easy to cut foam filters from inexpensive bulk material? How often are gasket replacements necessary, or are there common issues with parts failing over time. Of two Fluval 07 filters I’ve used, both needed replacement impeller shafts. Oase Biomaster filters seem to have an issue with the input/output head often needing replaced.
I admit cost isn’t a critical factor for me, but I know it is for many others, so this is another instance where finding the right balance is key, in this case, the balance between price and performance.
Share your thoughts. Do these factors seem to align with yours or do you think I’m way off base. Tell us what types and brands of filters you prefer and why.
The idea is that we can consolidate a lot of filter information in one place making it easier to find rather than searching through so many threads. Maybe this won't work but I thought it was worth giving it a try. Perhaps it may be better listed as an article at some point.
I'm going to get things started by discussing factors I feel are most important to me when choosing a filter.
1) Filtration Performance: This goes without saying. The filter’s primary job is to keep our water clean and free of anything that harms the inhabitants. Of course, there are multiple factors that play into this. Some say flow is most critical, while others claim media volume is most important. Are there other factors? I still have limited experience, but my view, having done considerable reading, is that flow tends to be a bit overblown. You’ll see recommendations of anywhere from 4 to 10 times turnover rate with most leaning toward the higher end of that. I don’t think turnover rate is really the detail to be concerned about, at least with heavily planted tanks like are the norm here. I think the focus should be simply on ensuring flow achieves the goal of effectively moving water through the system to remove toxins/waste, delivering nutrients, and aiding gas (oxygen/CO2) transfer. If a turnover rate of 3 or 4 does that without dead spots in the tank, you should be good. After all, most of us here are plant focused and therefore, the fish we generally have are smaller community species that typically don’t care for high flow (there are, of course, exceptions).
I think there’s a simpler answer regarding media volume; more is better. Obviously, there must be a balance between internal volume and overall size of the filter. Real estate in and around our aquarium stands is precious. Filters like the Fluval FX6 and the newest Aquael Hypermax are huge. If you’re going for one of those, you’re likely putting it on a large tank with plenty of space underneath but again, it’s a matter of finding the right balance that provides the performance you need in a manageable size.
2) Reliability/Durability: This is where solid reviews come in handy and why getting feedback from users here is invaluable. Filtration performance becomes moot if the filter isn’t running, or worse yet, just flooded your house. Being able to easily source spare parts is also valuable, which is why sticking to the top well-known brands is often a safe route. It’s also why many aquarists place canister filters in protective containers, something else to consider when taking into account, size of filter. (this is something I should really do as I’ve had to clean up a few significant spills after filter maintenance and not getting the top secured in place properly
)3) Tie – Maintenance/Noise Level: These two factors are equally important to me. If the filter is a pain to maintain, I’m going to put it off, and that’s bad. It affects the performance. But equally important to me is how noisy it is. I tend to be sensitive to annoying little sounds regardless of where I am; at home, in the car, at work, you name it. If the aquarium is in a part of the house I spend a lot of time in, well then, it’s even more important.
I don’t know if Oase was first to do it, but the idea of the prefilter was, I think, a game changer for many. I imagine it was derived from people installing foam filters on the intake pipes. Having an easily removable section with foam filters that catch a lot of large particles before entering the primary filter chamber is a great idea, resulting in expanded intervals between main filter head removals for cleaning.
Another aspect of maintenance is ease of priming. This could also be an aspect of performance but I don’t think it is quite as important. I’m not sure there is a canister filter that is truly or consistently easy to prime. Some may start out that way, but over time, become less and less so. This is an area I’d really like to see product designers put more serious thought. My experience so far is with Oase and the Fluval 07 series. Hated the Fuval priming and I’m just so-so with the Oase. Let me know your experience with priming other brands.
As for noise, I don’t mind the slight hum of an impeller as long as it’s steady and consistent, much the same way some people, including myself when I was younger, like the smooth steady sound of a fan at night to help them sleep. It’s when the sound becomes inconsistent, I’m bothered. I also don’t care for the sound of splashing/trickling water while I’m focused on other things. Only when I’m camping near the banks of a creek or other body of water is this OK
. This is one of the main reasons I’m not a fan of HOB filters. I’m also tweaking my CO2 reactor designs to minimize the bubble sounds of CO2 entering the reactor.4) Cost: Let’s be clear, the cost doesn’t stop when you pay the retail price for the filter. There’s the cost of media and spare parts plus the cost of electricity. What’s the rated wattage of the filter. I see the Aquael filters claim to consume lower power and are therefore cheaper to run. What about special filter cartridges or foam. Is it easy to cut foam filters from inexpensive bulk material? How often are gasket replacements necessary, or are there common issues with parts failing over time. Of two Fluval 07 filters I’ve used, both needed replacement impeller shafts. Oase Biomaster filters seem to have an issue with the input/output head often needing replaced.
I admit cost isn’t a critical factor for me, but I know it is for many others, so this is another instance where finding the right balance is key, in this case, the balance between price and performance.
Share your thoughts. Do these factors seem to align with yours or do you think I’m way off base. Tell us what types and brands of filters you prefer and why.
92 Replies
·
5594 views
I Donated 2026
Hi all,
First of all thanks so much for the amazing threads and input from all the super knowledgeable and experienced scapers on here.
My question and apologies if this has been specifically discussed previously, but I'm wondering if an RO system would be a worthwhile investment for a high tech planted tank.
My town water which I currently use is not on the grid with the main city water supply that I used to access. Our town water is sourced from a creek, not a huge reservoir, and can vary from time to time, more than I would like. For example, the PH can be anywhere from 7-8, KH when measured some months ago was 4dKH, is now 6. GH 7dGH.
I know they are still within reasonable bounds though.
I could look at ways to just lower KH using HCL for an example but that doesn't fix the stability of the water supply for the other elements.
I'm also not able to obtain a water report.
I've just put in a plant order for my new scape (which I think I'll start a journal on soon) that includes plants like Syngonanthus macrocaulon which prefers lower KH.
Ro a good investment or am I over thinking it?
First of all thanks so much for the amazing threads and input from all the super knowledgeable and experienced scapers on here.
My question and apologies if this has been specifically discussed previously, but I'm wondering if an RO system would be a worthwhile investment for a high tech planted tank.
My town water which I currently use is not on the grid with the main city water supply that I used to access. Our town water is sourced from a creek, not a huge reservoir, and can vary from time to time, more than I would like. For example, the PH can be anywhere from 7-8, KH when measured some months ago was 4dKH, is now 6. GH 7dGH.
I know they are still within reasonable bounds though.
I could look at ways to just lower KH using HCL for an example but that doesn't fix the stability of the water supply for the other elements.
I'm also not able to obtain a water report.
I've just put in a plant order for my new scape (which I think I'll start a journal on soon) that includes plants like Syngonanthus macrocaulon which prefers lower KH.
Ro a good investment or am I over thinking it?
86 Replies
·
5395 views
Journal High-Tech 90P Build
Hi guys!
I'm new here, but not entirely new to planted tanks though I've been out of the hobby for the better part of the last decade between kids and moving a couple of times - but finally in a spot where I can do something again. I'm mostly going to be making things up as I go along, but plan on a lot of automation (I want to integrate everything into home assistant) and a lot of DIY as I love the challenge of building things out myself.
The starting point:
I picked up a 90P rimless, low-iron tank on a great deal.
I have a rough idea in my head for a stand to be built from plywood - just have a couple other house projects to finish off before starting that built.
Wife says I can only have one aquarium, so for this tank, I want to go all out with a sump to allow for auto top off, and auto water changes, auto fertilizer dosing etc. etc. I have half a plan in my mind.
I've also started on the light fixture which I've modeled up in CAD, and plan on making out of an 8020 extrusion, and some 3D printed bits.
I'm using bridgelux gen 3 thrive CW (3000k) and WW (5000k) LED strips which have super high CRI at 98+ along with some specific XPE2 wavelengths that I'll solder onto some starboards. Far Red (730nm), Red (654nm), Cyan (495nm), Blue (455nm), Visible UV (415nm). Each segment of the white channels will be on its own driver so I can adjust left to right brightness in thirds, and each colour channel on its own driver so I can vary each channel on a time-based approach.
These will be run from a custom PCB board with Meanwell N-LDD drivers, and will run ESPHome on an ESP32 so it can link up with my Home Assistant installation.
That's it for now, this will probably be a very slow build so be warned if you follow along!
I'm new here, but not entirely new to planted tanks though I've been out of the hobby for the better part of the last decade between kids and moving a couple of times - but finally in a spot where I can do something again. I'm mostly going to be making things up as I go along, but plan on a lot of automation (I want to integrate everything into home assistant) and a lot of DIY as I love the challenge of building things out myself.
The starting point:
I picked up a 90P rimless, low-iron tank on a great deal.
I have a rough idea in my head for a stand to be built from plywood - just have a couple other house projects to finish off before starting that built.
Wife says I can only have one aquarium, so for this tank, I want to go all out with a sump to allow for auto top off, and auto water changes, auto fertilizer dosing etc. etc. I have half a plan in my mind.
I've also started on the light fixture which I've modeled up in CAD, and plan on making out of an 8020 extrusion, and some 3D printed bits.
I'm using bridgelux gen 3 thrive CW (3000k) and WW (5000k) LED strips which have super high CRI at 98+ along with some specific XPE2 wavelengths that I'll solder onto some starboards. Far Red (730nm), Red (654nm), Cyan (495nm), Blue (455nm), Visible UV (415nm). Each segment of the white channels will be on its own driver so I can adjust left to right brightness in thirds, and each colour channel on its own driver so I can vary each channel on a time-based approach.
These will be run from a custom PCB board with Meanwell N-LDD drivers, and will run ESPHome on an ESP32 so it can link up with my Home Assistant installation.
That's it for now, this will probably be a very slow build so be warned if you follow along!
37 Replies
·
2021 views
Got 3 AI Prime 16HD fresh water versions over my 125 gallon tank that is 72in long and 22in tall. At the end of the day I am not happy with them. About to pull the trigger on two Week Aqua L900 K PRO's that are 35in long for a total for 70in coverage on my 125Gal. Thought's concerns?
0 Replies
·
38 views
Supporting
I Donated 2026
Journal UNS 60S Pond Scape
After a bit of hiatus from the hobby, I'm jumping back in with a high-tech UNS 60S as a pond type scape. Normally one would have a nice set of images next with the initial setup. Currently mine is an empty tank and shelves of parts and equipment. I'm determined to take it slow, research each bit and have everything on hand before adding water.
I've found the in the past ~20 years there has been quite a lot of change in the hobby. So many more products available, my last high-tech tanks was T5's and Metal Halides. My have things changed.
My Plan
Lighting
Chihiros WRGB II Pro 60
Chihiros WRGB II Pro 60 Light Shade /w Mirror
Chihiros WRBG II Pro LED Light Hanging Kit
Week Aqua Arm Stand /Black (L Stand)
Oase Shutoff Valve 16/22 mm - x 2
FZone 3M Grey Tubing 16/22 mm
Stainless Steel 16/22 to 12/16 reducer
FZone 3M Grey Tubing 12/16 mm
FZone Mini Lily Pipes w/ Skimmer
I found that to use Lily pipes that fit this tank size, I'll need to use something small, hence the reduction in tubing size.
CO2 Art Dual Stage Regulator /w Bubble Counter and Solenoid
FZone CO2 Proof Line
CO2 Check Valve
NilocG CO2 Drop Checker /w Solution
Timer
Qanvee M2 Inline CO2 Diffuser
Lucked out with CO2, found someone on Facebook Marketplace selling 2 complete CO2 systems. With full tanks, for less than the price of a new CO2 Art Regulator. Snapped them both up.
Wood - Dragon Wood
Substrate
APT S - Base layer
UNS ControBase 2L
APT Jazz Caps
UNS ControSoil Black Fine 10L
UNS Mojave Extra Fine 8L- Open areas
UNS Sequoia 3L - Accent Rocks
Hygrophila pinnatifida
Ceratopteris thalictroides
Ludwigia palustris var Super Red
Under Wood and Rock
Cryptocoryne parva var Mini
Bucephalandra (assorted varieties)
On Rock at Water Line
Micranthemum callitrichoides var Cuba
Left and Right Sides in Sand
Eleocharis acicularis var Mini
Hydrocotyle verticillata
Floaters
Red Root Floater
Shrimp
Pygmy Cory
Otocinclus
Exotic Pleco
Red Neon Blue Eye Rainbowfish
Badis? Once plants grow in
Goby
Snails
That's the plan.
Started collecting bits in April, then found out I'd have to be in Dallas for most of May for some family matters. While in Dallas, Aquashella was in town along with an aquascaping demo of an LFS, Fish Gallery, by MJ Aquascaping of YouTube fame. Being my plan is based on the Guppy tank MJ created, I could not miss this opportunity. Learned a lot and had the opportunity to ask MJ a lot of questions.
My intention is to Dark Start, then plant.
I'm held up by the need of one part. The Week Aqua Arm Stand /Black (L Stand) base is too wide for this tank. In need of a 3 mm spacer. My neighbor, a metal shop, made me one out of ABS plastic. It works perfectly, only they made only one. I need two. My fault for not being clearer. I'll hit them up once they are back in the shop after the weekend.
More to come...
I've found the in the past ~20 years there has been quite a lot of change in the hobby. So many more products available, my last high-tech tanks was T5's and Metal Halides. My have things changed.
My Plan
Tank /Stand
UNS 60SLighting
Chihiros WRGB II Pro 60
Chihiros WRGB II Pro 60 Light Shade /w Mirror
Chihiros WRBG II Pro LED Light Hanging Kit
Week Aqua Arm Stand /Black (L Stand)
Filtration
Oase BioMaster 2 Thermo 250Oase Shutoff Valve 16/22 mm - x 2
FZone 3M Grey Tubing 16/22 mm
Stainless Steel 16/22 to 12/16 reducer
FZone 3M Grey Tubing 12/16 mm
FZone Mini Lily Pipes w/ Skimmer
I found that to use Lily pipes that fit this tank size, I'll need to use something small, hence the reduction in tubing size.
CO2
5 LB CO2 TankCO2 Art Dual Stage Regulator /w Bubble Counter and Solenoid
FZone CO2 Proof Line
CO2 Check Valve
NilocG CO2 Drop Checker /w Solution
Timer
Qanvee M2 Inline CO2 Diffuser
Lucked out with CO2, found someone on Facebook Marketplace selling 2 complete CO2 systems. With full tanks, for less than the price of a new CO2 Art Regulator. Snapped them both up.
Hardscape
Rock - Black Lava RockWood - Dragon Wood
Substrate
APT S - Base layer
UNS ControBase 2L
APT Jazz Caps
UNS ControSoil Black Fine 10L
UNS Mojave Extra Fine 8L- Open areas
UNS Sequoia 3L - Accent Rocks
Plants
Rear MiddleHygrophila pinnatifida
Ceratopteris thalictroides
Ludwigia palustris var Super Red
Under Wood and Rock
Cryptocoryne parva var Mini
Bucephalandra (assorted varieties)
On Rock at Water Line
Micranthemum callitrichoides var Cuba
Left and Right Sides in Sand
Eleocharis acicularis var Mini
Hydrocotyle verticillata
Floaters
Red Root Floater
Livestock
Wish List: at this time, nothing is set in stoneShrimp
Pygmy Cory
Otocinclus
Exotic Pleco
Red Neon Blue Eye Rainbowfish
Badis? Once plants grow in
Goby
Snails
That's the plan.
Started collecting bits in April, then found out I'd have to be in Dallas for most of May for some family matters. While in Dallas, Aquashella was in town along with an aquascaping demo of an LFS, Fish Gallery, by MJ Aquascaping of YouTube fame. Being my plan is based on the Guppy tank MJ created, I could not miss this opportunity. Learned a lot and had the opportunity to ask MJ a lot of questions.
My intention is to Dark Start, then plant.
I'm held up by the need of one part. The Week Aqua Arm Stand /Black (L Stand) base is too wide for this tank. In need of a 3 mm spacer. My neighbor, a metal shop, made me one out of ABS plastic. It works perfectly, only they made only one. I need two. My fault for not being clearer. I'll hit them up once they are back in the shop after the weekend.
More to come...
92 Replies
·
7701 views
Uh oh! Made the leap and purchased a UNS 60L aquarium today to replace my UNS 5N. It's going to go on the edge of my kitchen island, so keeping equipment minimal and attractive is going to be a priority here.
The aesthetic goal is something resembling an Iwagumi that can be viewed from 270 degrees. Biggest inspiration currently is this scape by @qball_aquatics in Sydney. I'm not a huge Iwagumi person and I normally like substantial hardscape, but something about the plant selection here scales so perfectly in this long shallow tank, so I'm simply going to copy it.
UNS 60L Dimensions: 24" x 8" x 8"
Tentative Equipment List
Filter: Oase Filtosmart 60
Inflow/outflow: ASG 10mm Stainless Steel Inflow/Outflow pipes
Light: Chihiros CII RGB or ONF Flat Nano - intentionally going for a short light for more of a spotlight effect with shadowing on the outer edges
CO2: Paintball setup, potentially mounted horizontally with brackets under the counter
Plants:
Glosso or HC carpet
Eleocharis parvula for height around the stones
Echinodorus 'Aflame" centerpiece plant
Livestock:
Blue dream neocaridina
Maybe chili rasboras
How does this setup sound? Very open to suggestions.
The aesthetic goal is something resembling an Iwagumi that can be viewed from 270 degrees. Biggest inspiration currently is this scape by @qball_aquatics in Sydney. I'm not a huge Iwagumi person and I normally like substantial hardscape, but something about the plant selection here scales so perfectly in this long shallow tank, so I'm simply going to copy it.
UNS 60L Dimensions: 24" x 8" x 8"
Tentative Equipment List
Filter: Oase Filtosmart 60
Inflow/outflow: ASG 10mm Stainless Steel Inflow/Outflow pipes
Light: Chihiros CII RGB or ONF Flat Nano - intentionally going for a short light for more of a spotlight effect with shadowing on the outer edges
CO2: Paintball setup, potentially mounted horizontally with brackets under the counter
Plants:
Glosso or HC carpet
Eleocharis parvula for height around the stones
Echinodorus 'Aflame" centerpiece plant
Livestock:
Blue dream neocaridina
Maybe chili rasboras
How does this setup sound? Very open to suggestions.
15 Replies
·
517 views