Help RO system installation help

[CincyScaper]

Hi guys,

Sorry that i come up with so many questions and thank you all for helping me out.
So i installed a tankless RO system from Waterdrop G6p800, and did a TEE from the output line which goes to the faucet.
I used this system which had the TEE in it https://www.amazon.com/dp/B094H8ZM5W?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1


Unfortunately it is leaking both from the Tee and the tap on the TEE. This is a tankless RO system so is there just too much pressure ? Do you guys know which TEE valve i should buy for this ? preferably something that i can pick up at home depot or lowe's.

Thanks all

 

[gnatster]

Be sure the tubing is cut square on the end, with no debris. Don't twist when inserting tubing into the fitting.

 

[JayP]

Be sure the tubing is cut square on the end, with no debris. Don't twist when inserting tubing into the fitting.

I agree with this. Just like when installing PEX, it's very important to have a clean square cut when using push-to-connect-fittings.

 

[CincyScaper]

Thanks! Checked and made sure they were cut properly but still leaked. Ended up getting new fittings from Home Depot. They were much more expensive than the one I got from Amazon. Worked great no leak and did my first water change with home RO water!!

John Guest 1/4 in. O.D. Push-To-Connect Polypropylene Tee Fitting PP0208WHD - The Home Depot

Add length to an existing piece of your pipeline by OD PushToConnect Polypropylene Tee Fitting John Guest.

www.homedepot.com