We are ScapeCrunch, the place where planted aquarium hobbyists come to build relationships and support each other. When you're tired of doom scrolling, you've found your home here.
I have a Twinstar 1200S V (the new model that has app support). I love the look of the light itself and it makes my tank look great, but either the app is fundamentally flawed or I'm missing something obvious. I have a smart plug on this light so I can turn it off and on with a voice command. The light clearly has a saved state as when it gets powered on it turns on with the right spectrum and the intensity. BUT, it also only turns on for 6 hours before turning off. Every. Single. Time.
My set photoperiod is 8 hours, so the light turns off 2 hours short of the correct time every day.
I can make a work around by turning the light off and back on again at the smart plug, (gaining an additional 6 hour window of 'on' time when I only need 2 hours before the smart switch unplugs the light again). BUT, I would much rather have the light allow for it to be on for as long as I want and turn off when I want.
I contacted twinstar support via email more then a month ago and got absolutely no response. So pretty much the worse product support something can have.
The obvious issue is the inbuilt timer in the app is defaulting to 6 hours. I have tried changing this timer to be longer (set it for 23 hours). I also have tried having the timer just set to 'off'. Neither does anything.
Does anyone else have this light? Does anyone else have any suggestions?
I'm not really an aquascaper. I'm more of a rare plant collector, and I'm mostly into emersed plants and outdoor wildlife ponds. My aquarium is usually just a place where I experiment with different plants I've collected and stuff. But I'm interested in working at an aquascaping store one day, so I'm wondering what kind of things I should know.
I've watched some of Green Aqua's critiques of viewers' aquariums, but honestly, I find some of Tommy's comments a bit strange sometimes. He criticises certain things for being this or that, and so on. It got me thinking if there is a double standard here? Like, if Mr. Amano had made exactly the same aquascape, would people have had a completely different opinion? Would they see it as some kind of masterpiece?
It kind of reminds me of classical piano competitions, too. Imagine if a composer entered a competition and played their own compositions, but the judges didn't know who they were. They would get a bad score for sure, because music technique in their time wasn’t the same as now.
Now back to my question: Are there actually set rules in aquascaping, like ADA principles or other standards? And at what point do we get to develop our own styles rather than follow certain rules?
Starbond, the makers of Cyanocrylate Adhesives, has a few items on sale. Black Friday Starts Early 2026 | Starbond. I'm a fan of their Clog Prevention Stoppers. There are some sanding discs on sale for the woodworkers in the crowd too.
Saw a couple of you guys fighting for your lives over on Reddit. Valiant effort, but it’s just not the space for this hobby. Reddit will always be an open forum catering to the lowest common denominator. Nobody wants to see what years of focused practice produce, and will write off any decent aquascape or skilled plant husbandry as either having “thousands of dollars to spend” or just gatekeeping and elitism. Just let them have it. There’s no meaningful discussion to be had over there anyway.
I’ll soon be setting up two new tanks, a UNS 90p and a 50c. (Not so!) Patiently awaiting tanks and stands delivery.
They will both be middle energy tanks. I have lengthy periods of busy time and travel that mean the tanks need to survive without human intervention here and there. So plenty of automation is needed, and slow and steady wins over high energy. Or in BBQ smoking terms: low and slow.
Plans:
Injected CO2, but less than 30ppm
Inert gravel
Tidal HOB filter and partial UGF plate.
Less than EI ferts, but more than PPS pro.
Tap water (my tap is 50 TDS and only 10ppm Ca) remineralized to 30ppm Ca and 3-4 dKH.
Lower light levels: Week aqua L on 90p and Chihiros wrgb 2 slim on 50c.
Easy slow growing plants, and a few fish. Thinking the 50c will be a shrimp tank.
Some hardscape but nothing crazy
My last tank has had a rough year. Hurricane Helene meant two weeks with no electricity, and much longer without decent water changes.
Then last summer the tank developed a slow leak while I was out of town (ugh!). Had to fly home for a week to triage. Fish and plants have been in temporary tanks. Plants are struggling. Photo is when they had already been in temporary bin for over 6 weeks, I was surprised it didn’t look like an algae infested swamp.
Sooo ready for my new tanks! These are my first really nice tanks, I’ve only owned petco specials before.
For the new tanks I'm planning on over ordering plants since my surviving plants are clearly pretty weak at this point.
I'm Josh (JCole on most of the reef forums). I've been in the saltwater side of the hobby for over 20 years, mostly running Acropora-dominant systems. I'm officially getting out of reef keeping and converting my current tank to a planted freshwater tank. I'll be honest up front: I know almost nothing about planted tanks. So I figured the best move was to introduce myself, start a build thread, and beg for help LOL.
A little background so you know a bit about my previous addiction!
For a long stretch, my main tank was a 150-gallon Acro tank plumbed to a sump, a 20-gallon chaeto refugium, and a frag tank out in the garage. I crashed it in late 2020, lost over 70 Acros, and kept about six. Rebuilt it and kept going.
I eventually outgrew the 150 with coral colonies and needed to upgrade. My next tank was a 480-gallon acrylic peninsula, 8'x4'x2', with a 300-gallon stock tank sump in the garage.
The aquarium was a dream aquarium of mine, but with having a full time job running a company with 3 boys in travel ball baseball, it consumed all of my time and I just could not give the tank what it actually needed and deserved. I eventually reset it, built my own cement rock and shelves, and sold the whole system in early 2025.
After that, I downsized to a Marineland 180 (72x24x24) in the same room. This is the tank I'm converting to freshwater.
WHERE I'M AT RIGHT NOW
Tank: Marineland 180, 72x24x24, glass.
Goal: High-tech planted. CO2, good light, fertilizers, the whole thing.
Cleaning: Done. I stripped the tank and sump with bleach and muriatic acid to get all the coralline algae off. It's clean and ready for water.
Sump: My Trigger Triton 44 sump is already set up and staying. I'm not going canister right now.
Controller: I've run an Apex for about 8 years, and I also wrote my own Raspberry Pi controller app that talks to the Apex and my Kasa, Shelly, and Jebao gear.
Lights: I pulled the halides and kept the pendants. For now, each pendant has a 120V LED grow light bulb in it.
Substrate: I have 19 bags of CaribSea Eco-Complete Planted ready to go.
WHERE I NEED HELP AND FEEDBACK
CO2 with a sump: I know a sump gasses off CO2. Since I'm keeping mine, what tips do you have to keep the loss down (lower the return, cover the sump, change the overflow, anything else)?
CO2 control: I can run a solenoid and a pH probe off the Apex or my own app. Do you control CO2 by pH, by a timer, or both? Is a drop checker still the thing to trust? And what do you use to actually get the CO2 into 180 gallons—an inline reactor on the return or diffusers? What safeguards do you run so a stuck solenoid doesn't gas the fish overnight?
Lighting: Are LED grow bulbs in the pendants enough for a high-tech 72" long, 24" deep tank, or is that a stopgap? If I upgrade, what would you put over it?
Substrate and hardscape: I read that people put lava rock in filter bags on the bottom to build up hills and slopes so the deep rooting plants get more depth. Is that the way to do it, and how deep should the Eco-Complete be on top? Is 19 bags enough for what I'm trying to do?
Fertilizers: EI or lean dosing for a first-timer? I'm used to dosing two-part and testing a lot, so numbers do not scare me.
Plants and fish: I want to start with beginner plants, but I'm not scared to try the harder stuff. Acros taught me patience, so I'd like to work up to the more advanced plants. What would you start with in a 72" high-tech tank, and what would you add later? And what fish do well in that setup?
Water: I've always run RODI for the reef. For planted, do I use straight tap, RO with remineralizer, or a blend? Which GH and KH numbers should I be shooting for?
Cycling: Plants change how you cycle, right? What's the order of operations?
Fair warning, I'm a gear nerd and I tend to wing it, so feel free to tell me when I'm about to do something dumb. I'll keep this thread updated as I go.
So I’ve currently (supposedly) got three different cultivars of R. rotundifolia: ‘Blood Red SG’, ‘H’ra’, (oooh punctuation got a bit spicy there) and ‘Colorata’. I’ve not had the latter two for very long, and I’m not super educated on any of them, but I keep having two thoughts when viewing pictures and researching them.
One: they don’t really seem all that crazy different, and two: I’m less and less certain there’s any real utility in keeping more than one around.
Now I’m not terribly experienced or well informed in this space yet, so I could completely be missing things due to inexperience or ignorance. Another potential confounding factor is that I’m red deficient color blind so maybe there are subtle differences just lost on me.
So anyone have any thoughts on this be they “yeah there’s not a ton of difference” or “HEY IDIOT HERES THE 3479 WAYS THEYRE DIFFERENT AND WHY NO ONE LIKES YOU”? It seems there are maybe some slight differences in color, leaf shape and texture, growth habit, etc that may be more relevant at a level well beyond where I’m at, but even then I’m not sure there’s that much utility to be gained. I could maybe see a benefit in higher nitrate systems having the sg be properly red and then having one of the others be more pink to green I guess, but I’m not convinced I should continue to dedicate space to 3 rotundifolias when there are so many more plants out there demanding my money.
I am not as technically inclined as some members on here, but for those who are, answer me this. Could you not attach tubing to the end of this device where the sensor/probe is and run it into the aquarium in a similar fashion in which the drop checker works? Instead of waiting for a color change you could get an actual PPM reading? Please let me know if I am completely off base and why, or if this could possibly be a rudimentary way of getting more accurate co2 concentrations at a fraction of the cost of some high end equipment designed for submerged readings.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.