Welcome to ScapeCrunch
We are ScapeCrunch, the place where planted aquarium hobbyists come to build relationships and support each other. When you're tired of doom scrolling, you've found your home here.
Social Feed
When making a diy micro fertilizer how important is it that the micros are chelated?
My tank has a ph below 7.
Also I could use suggestions on what type of iron I should get. I see iron ferrous sulfate, red iron oxide, and black iron oxide.
My tank has a ph below 7.
Also I could use suggestions on what type of iron I should get. I see iron ferrous sulfate, red iron oxide, and black iron oxide.
6 Replies
·
592 views
looked at the chihiros b lighting and hear the app is a turd saying It goes out sometimes and cant get light to turn on without it. people telling me the b models don't grow plants?! I don't even have a phone lol so no apps for me unless its on laptop. have a seaoura 628, 659 and a hygger 999 and old beamslight 30" 6500 light bright as hell over the others more white light. though about going with chihiros b on 29g for more par, the seaoura659 says its 90 par at 18" and the 628 is 50 par at 18" who knows the truth don't have par meter just what I've found online.
0 Replies
·
5 views
Got these for 10.00 a 5g bucket full I cant/ wont buy seiryu stone or others cost me 22 in rocks got 2 5g buckets for 22,00 for all in with tax a steal for rock scapes with wood I'm going for. Its around 150lbs for 22.00 lol bye other rocks to to much for me! 
6 Replies
·
76 views
Hello everybody im opening this topic since i cant get rid of the algae and im getting a little tired of it
I have a Juwel Rio 350 liter
3x onex daytime 2x colour 1x plant
At 100% 186 par at the bottom (tank is 66cm high)
I have a 1.5 hour build up and 1.5 hour build off 5 hours full light (90% atm because of the algae)
I moved the timing a little earlier yesterday since i tought it may be on to late (22:00) and not getting enough fully darkness for the plants to recover so it goes out now at 20:00
My co2 goes on 2.5 hour before lights go on and half an hour before lights go out
Ph drop of 1.4-1.5 (dropchecker 30mg/l limegreen/yellow)
Filtration: tetra ex 1500, oase biomaster 750 thermo (both with a spraybar creating a roll over), eheim skim 350 and a marine 6000 wavemaker that goes on every hour for 5 minutes (from 12:00-20:00) to distribute loose dirt so the filters will suck it up and keep the plants more clean
Waterchange 50% a week on monday with only RO. Apt sky to a gh of 8
For fertz i use Apt E dosing 6ml a day (keeping the no3 stable trough the whole week from the strategy of Dennis)
I have tried higher dosing aiming at 20mg/l no3 to now leaner dosing.
My plants are not super healthy. The fast growing stems have healthy tops but bad old growth. Even when replanting the healthy parts they turn out the same way.
They are also not as deep red as they should be with 186 par and look like they lack light in the bottom of the tank. My theory is that the 66cm depth is filtering a lot of the spectrum especially red.
The soil is now 3 months in the tank and is 4 months matured if you include priming the soil in a big bucket for bacteries (darkstart)
I had algae before the soil change and still have it now. I tought the soil would be the cause.
I dont know what else i should try or what could be the problem
Thanks in advance for your help and reading this big text
I have a Juwel Rio 350 liter
3x onex daytime 2x colour 1x plant
At 100% 186 par at the bottom (tank is 66cm high)
I have a 1.5 hour build up and 1.5 hour build off 5 hours full light (90% atm because of the algae)
I moved the timing a little earlier yesterday since i tought it may be on to late (22:00) and not getting enough fully darkness for the plants to recover so it goes out now at 20:00
My co2 goes on 2.5 hour before lights go on and half an hour before lights go out
Ph drop of 1.4-1.5 (dropchecker 30mg/l limegreen/yellow)
Filtration: tetra ex 1500, oase biomaster 750 thermo (both with a spraybar creating a roll over), eheim skim 350 and a marine 6000 wavemaker that goes on every hour for 5 minutes (from 12:00-20:00) to distribute loose dirt so the filters will suck it up and keep the plants more clean
Waterchange 50% a week on monday with only RO. Apt sky to a gh of 8
For fertz i use Apt E dosing 6ml a day (keeping the no3 stable trough the whole week from the strategy of Dennis)
I have tried higher dosing aiming at 20mg/l no3 to now leaner dosing.
My plants are not super healthy. The fast growing stems have healthy tops but bad old growth. Even when replanting the healthy parts they turn out the same way.
They are also not as deep red as they should be with 186 par and look like they lack light in the bottom of the tank. My theory is that the 66cm depth is filtering a lot of the spectrum especially red.
The soil is now 3 months in the tank and is 4 months matured if you include priming the soil in a big bucket for bacteries (darkstart)
I had algae before the soil change and still have it now. I tought the soil would be the cause.
I dont know what else i should try or what could be the problem
Thanks in advance for your help and reading this big text
38 Replies
·
897 views
Supporting
I Donated 2026
I’ve recently become aware of some opportunities to (supposedly) buy beautiful clumps of Buce from suppliers in Indonesia. Do any of the scapecrunchers have any knowledge/lessons learned to share on this topic?
3 Replies
·
48 views
Supporting
I Donated 2026
Rockstar
There are several threads discussing the new Aquael Hypermax 4500BT. I'm sure many would like some reports on it's performance over time. We have a thread discussing nano canister filters. We're all waiting for one of @Naturescapes_Rocco in depth write-ups discussing his filtration set-up. @Pepere and @*Ci* have unique set-ups as well, @Kwyet has used a matten filter, and we have several other members running sumps. That doesn't even include all those running sponge and HOB filters.
The idea is that we can consolidate a lot of filter information in one place making it easier to find rather than searching through so many threads. Maybe this won't work but I thought it was worth giving it a try. Perhaps it may be better listed as an article at some point.
I'm going to get things started by discussing factors I feel are most important to me when choosing a filter.
1) Filtration Performance: This goes without saying. The filter’s primary job is to keep our water clean and free of anything that harms the inhabitants. Of course, there are multiple factors that play into this. Some say flow is most critical, while others claim media volume is most important. Are there other factors? I still have limited experience, but my view, having done considerable reading, is that flow tends to be a bit overblown. You’ll see recommendations of anywhere from 4 to 10 times turnover rate with most leaning toward the higher end of that. I don’t think turnover rate is really the detail to be concerned about, at least with heavily planted tanks like are the norm here. I think the focus should be simply on ensuring flow achieves the goal of effectively moving water through the system to remove toxins/waste, delivering nutrients, and aiding gas (oxygen/CO2) transfer. If a turnover rate of 3 or 4 does that without dead spots in the tank, you should be good. After all, most of us here are plant focused and therefore, the fish we generally have are smaller community species that typically don’t care for high flow (there are, of course, exceptions).
I think there’s a simpler answer regarding media volume; more is better. Obviously, there must be a balance between internal volume and overall size of the filter. Real estate in and around our aquarium stands is precious. Filters like the Fluval FX6 and the newest Aquael Hypermax are huge. If you’re going for one of those, you’re likely putting it on a large tank with plenty of space underneath but again, it’s a matter of finding the right balance that provides the performance you need in a manageable size.
2) Reliability/Durability: This is where solid reviews come in handy and why getting feedback from users here is invaluable. Filtration performance becomes moot if the filter isn’t running, or worse yet, just flooded your house. Being able to easily source spare parts is also valuable, which is why sticking to the top well-known brands is often a safe route. It’s also why many aquarists place canister filters in protective containers, something else to consider when taking into account, size of filter. (this is something I should really do as I’ve had to clean up a few significant spills after filter maintenance and not getting the top secured in place properly
)
3) Tie – Maintenance/Noise Level: These two factors are equally important to me. If the filter is a pain to maintain, I’m going to put it off, and that’s bad. It affects the performance. But equally important to me is how noisy it is. I tend to be sensitive to annoying little sounds regardless of where I am; at home, in the car, at work, you name it. If the aquarium is in a part of the house I spend a lot of time in, well then, it’s even more important.
I don’t know if Oase was first to do it, but the idea of the prefilter was, I think, a game changer for many. I imagine it was derived from people installing foam filters on the intake pipes. Having an easily removable section with foam filters that catch a lot of large particles before entering the primary filter chamber is a great idea, resulting in expanded intervals between main filter head removals for cleaning.
Another aspect of maintenance is ease of priming. This could also be an aspect of performance but I don’t think it is quite as important. I’m not sure there is a canister filter that is truly or consistently easy to prime. Some may start out that way, but over time, become less and less so. This is an area I’d really like to see product designers put more serious thought. My experience so far is with Oase and the Fluval 07 series. Hated the Fuval priming and I’m just so-so with the Oase. Let me know your experience with priming other brands.
As for noise, I don’t mind the slight hum of an impeller as long as it’s steady and consistent, much the same way some people, including myself when I was younger, like the smooth steady sound of a fan at night to help them sleep. It’s when the sound becomes inconsistent, I’m bothered. I also don’t care for the sound of splashing/trickling water while I’m focused on other things. Only when I’m camping near the banks of a creek or other body of water is this OK
. This is one of the main reasons I’m not a fan of HOB filters. I’m also tweaking my CO2 reactor designs to minimize the bubble sounds of CO2 entering the reactor.
4) Cost: Let’s be clear, the cost doesn’t stop when you pay the retail price for the filter. There’s the cost of media and spare parts plus the cost of electricity. What’s the rated wattage of the filter. I see the Aquael filters claim to consume lower power and are therefore cheaper to run. What about special filter cartridges or foam. Is it easy to cut foam filters from inexpensive bulk material? How often are gasket replacements necessary, or are there common issues with parts failing over time. Of two Fluval 07 filters I’ve used, both needed replacement impeller shafts. Oase Biomaster filters seem to have an issue with the input/output head often needing replaced.
I admit cost isn’t a critical factor for me, but I know it is for many others, so this is another instance where finding the right balance is key, in this case, the balance between price and performance.
Share your thoughts. Do these factors seem to align with yours or do you think I’m way off base. Tell us what types and brands of filters you prefer and why.
The idea is that we can consolidate a lot of filter information in one place making it easier to find rather than searching through so many threads. Maybe this won't work but I thought it was worth giving it a try. Perhaps it may be better listed as an article at some point.
I'm going to get things started by discussing factors I feel are most important to me when choosing a filter.
1) Filtration Performance: This goes without saying. The filter’s primary job is to keep our water clean and free of anything that harms the inhabitants. Of course, there are multiple factors that play into this. Some say flow is most critical, while others claim media volume is most important. Are there other factors? I still have limited experience, but my view, having done considerable reading, is that flow tends to be a bit overblown. You’ll see recommendations of anywhere from 4 to 10 times turnover rate with most leaning toward the higher end of that. I don’t think turnover rate is really the detail to be concerned about, at least with heavily planted tanks like are the norm here. I think the focus should be simply on ensuring flow achieves the goal of effectively moving water through the system to remove toxins/waste, delivering nutrients, and aiding gas (oxygen/CO2) transfer. If a turnover rate of 3 or 4 does that without dead spots in the tank, you should be good. After all, most of us here are plant focused and therefore, the fish we generally have are smaller community species that typically don’t care for high flow (there are, of course, exceptions).
I think there’s a simpler answer regarding media volume; more is better. Obviously, there must be a balance between internal volume and overall size of the filter. Real estate in and around our aquarium stands is precious. Filters like the Fluval FX6 and the newest Aquael Hypermax are huge. If you’re going for one of those, you’re likely putting it on a large tank with plenty of space underneath but again, it’s a matter of finding the right balance that provides the performance you need in a manageable size.
2) Reliability/Durability: This is where solid reviews come in handy and why getting feedback from users here is invaluable. Filtration performance becomes moot if the filter isn’t running, or worse yet, just flooded your house. Being able to easily source spare parts is also valuable, which is why sticking to the top well-known brands is often a safe route. It’s also why many aquarists place canister filters in protective containers, something else to consider when taking into account, size of filter. (this is something I should really do as I’ve had to clean up a few significant spills after filter maintenance and not getting the top secured in place properly
)3) Tie – Maintenance/Noise Level: These two factors are equally important to me. If the filter is a pain to maintain, I’m going to put it off, and that’s bad. It affects the performance. But equally important to me is how noisy it is. I tend to be sensitive to annoying little sounds regardless of where I am; at home, in the car, at work, you name it. If the aquarium is in a part of the house I spend a lot of time in, well then, it’s even more important.
I don’t know if Oase was first to do it, but the idea of the prefilter was, I think, a game changer for many. I imagine it was derived from people installing foam filters on the intake pipes. Having an easily removable section with foam filters that catch a lot of large particles before entering the primary filter chamber is a great idea, resulting in expanded intervals between main filter head removals for cleaning.
Another aspect of maintenance is ease of priming. This could also be an aspect of performance but I don’t think it is quite as important. I’m not sure there is a canister filter that is truly or consistently easy to prime. Some may start out that way, but over time, become less and less so. This is an area I’d really like to see product designers put more serious thought. My experience so far is with Oase and the Fluval 07 series. Hated the Fuval priming and I’m just so-so with the Oase. Let me know your experience with priming other brands.
As for noise, I don’t mind the slight hum of an impeller as long as it’s steady and consistent, much the same way some people, including myself when I was younger, like the smooth steady sound of a fan at night to help them sleep. It’s when the sound becomes inconsistent, I’m bothered. I also don’t care for the sound of splashing/trickling water while I’m focused on other things. Only when I’m camping near the banks of a creek or other body of water is this OK
. This is one of the main reasons I’m not a fan of HOB filters. I’m also tweaking my CO2 reactor designs to minimize the bubble sounds of CO2 entering the reactor.4) Cost: Let’s be clear, the cost doesn’t stop when you pay the retail price for the filter. There’s the cost of media and spare parts plus the cost of electricity. What’s the rated wattage of the filter. I see the Aquael filters claim to consume lower power and are therefore cheaper to run. What about special filter cartridges or foam. Is it easy to cut foam filters from inexpensive bulk material? How often are gasket replacements necessary, or are there common issues with parts failing over time. Of two Fluval 07 filters I’ve used, both needed replacement impeller shafts. Oase Biomaster filters seem to have an issue with the input/output head often needing replaced.
I admit cost isn’t a critical factor for me, but I know it is for many others, so this is another instance where finding the right balance is key, in this case, the balance between price and performance.
Share your thoughts. Do these factors seem to align with yours or do you think I’m way off base. Tell us what types and brands of filters you prefer and why.
135 Replies
·
8923 views
Supporting
Trying a true journal format. Let me know if it's too much writing. My natural tendency is to bullet point everything.
The Mishap That Started It All
This whole project began at 6:30 a.m., courtesy of my Oase Biomaster Thermo 250 deciding to serenade me with impeller noise while I was trying to work from home. Biofilm on the impeller — nothing dramatic — but the sound was maddening, especially with an 8 a.m. call with our London office looming. So I did what any aquarist does under pressure: a lightning‑fast pre‑filter and impeller clean.That’s when the universe decided to intervene.
While disconnecting the hoses — the same routine I’ve done countless times — the lock failed. Suddenly a vacuum of water blasted across the floor of my upstairs alcove “office.” I yanked the intake and outflow from my 60U, stopping the torrent, but not before a solid gallon had soaked into the floorboards.
My wife woke up to the sound of chaos and the sight of me standing in a puddle. Understandably, she was not thrilled. The alcove has cathedral ceilings, so every noise echoes, and the massive 8‑foot cabinet we built with her dad years ago makes cleaning underneath nearly impossible. It’s not a space designed for aquariums, humidity, or early‑morning filter geysers.
As we cleaned, she admitted she hated having tanks and equipment out in the open upstairs. Fair enough. When we built the house, the plan was always for my “stuff” to live in the downstairs office while she had the rest of the house. But during COVID she needed privacy for patient calls, so I gave her the office and moved my stuff upstairs. Now her role has changed — two days in the hospital, one day from home — and the need for that arrangement is gone.
So I floated the idea: What if I moved everything back downstairs, consolidated the two smaller tanks into one larger, beautifully executed setup — something like the living room tank she actually likes? Less noise, less humidity upstairs, and I get a proper scaping space again.
To my mild shock, she was completely on board. From a mishap came opportunity.
Choosing the Tank
Once the idea settled, I had to pick the right aquarium. I landed on the AquaEl Ultrascaper 90 — the dimensions are perfect, and I’d been eyeing it ever since researching the Skylight Hyperspot and AquaEl’s filter lineup. The tank was designed with the scapers at AquaShow in Poland, and their sample layouts are right up there with ADA, ADG, and Green Aqua imo.Finding one in the U.S. was the next challenge. I reached out to the AquaEl rep, asked about the Hypermax for my living room tank, and inquired about Ultrascaper 90 availability. He pointed me to Fish Tanks Direct — and with a discount code in hand, I placed the order for the snow variant. My only quandy was to go for the cheaper one and get a Netlea AT5S to hang or try their newer attractive but inferior light option (RGB vs WBG). I chose to try their light as it looked interesting and the PAR on paper is more than enough.
Link for reference:https://fishtanksdirect.com/aquael-ultrascape-90-with-ultra-slim-snow-tank-light-cabinet/
Atlanta Weekend & Tank Comparisons
Right after ordering, we had a weekend trip to Atlanta for one of my wife’s appointments. On Friday we visited the botanical garden, grabbed food, and while she was at her appointment Saturday, I made the rounds to three local fish stores. The Aquarium was an option but a Saturday solo but spending roughly $100 to be around 10 million families sounded less enjoyable than exploring ATL suburbs and seeing the stores and their tanks.Premiere Aquatics had a beautiful setup UNS 90U and one for sale as well but at nearly $2,000 out the door it wasn't a great deal. Plus the tank is taller than I wanted, it wasn’t the right fit. I did pick up two gorgeous rose swords and a great piece of ghost wood.
I went to one store in Alpharetta but it was out of literally everything, not sure if they are doing poorly or just sell out fast and under order. I did buy a crinum there. Plus I liked driving from Premier to their.
Then I got lucky at Optimum Aquarium — they had an AquaEl Ultrascaper 90 in stock that had arrived that week, priced at a very respectable $1,000 (without the light). If the cabinet had been white, I would’ve bought it on the spot. They also had a wide range of tanks, which let me compare my choice to the Fluval Opti White 90 (a very reasonable $700) and several Aquatlantis rimless tanks I didn’t even know were available in the U.S. Their shallow 80 is especially cool — tank, stand, and light for $830, I would get a different color but I like the concept. They also had a bunch of healthy Dwarf Sag for $3 dollars so I bought a 4 bunches to use as I couldn't find dwarf chain swords easily online and heleiatium tenellum is a little too small.
My takeaways:
- Fluval Opti White 90: Nice tank but a bit small and too tall, the stand feels cheap and lightweight. Attractive for the price, but not my pick.
- Aquatlantis: Surprisingly impressive. I’d choose them over Fluval at similar price points.
- UNS 90U: The stands are unquestionably superior. The tank mitering is spectacular.
- AquaEl Ultrascaper 90:
- Stand: Best flat‑pack stand I’ve seen, though still a flat‑pack.
- Glass: Equal quality to UNS but no mitering.
- Dimensions: 90 × 60 × 45 — absolutely perfect.
- Incredible depth
- Lower height makes it ideal for seated viewing
- Easier to work in
- Better top‑down perspective
16 Replies
·
1079 views
Uh oh! Made the leap and purchased a UNS 60L aquarium today to replace my UNS 5N. It's going to go on the edge of my kitchen island, so keeping equipment minimal and attractive is going to be a priority here.
The aesthetic goal is something resembling an Iwagumi that can be viewed from 270 degrees. Biggest inspiration currently is this scape by @qball_aquatics in Sydney. I'm not a huge Iwagumi person and I normally like substantial hardscape, but something about the plant selection here scales so perfectly in this long shallow tank, so I'm simply going to copy it.
UNS 60L Dimensions: 24" x 8" x 8"
Tentative Equipment List
Filter: Oase Filtosmart 60
Inflow/outflow: ASG 10mm Stainless Steel Inflow/Outflow pipes
Light: Chihiros CII RGB or ONF Flat Nano - intentionally going for a short light for more of a spotlight effect with shadowing on the outer edges
CO2: Paintball setup, potentially mounted horizontally with brackets under the counter
Plants:
Glosso or HC carpet
Eleocharis parvula for height around the stones
Echinodorus 'Aflame" centerpiece plant
Livestock:
Blue dream neocaridina
Maybe chili rasboras
How does this setup sound? Very open to suggestions.
The aesthetic goal is something resembling an Iwagumi that can be viewed from 270 degrees. Biggest inspiration currently is this scape by @qball_aquatics in Sydney. I'm not a huge Iwagumi person and I normally like substantial hardscape, but something about the plant selection here scales so perfectly in this long shallow tank, so I'm simply going to copy it.
UNS 60L Dimensions: 24" x 8" x 8"
Tentative Equipment List
Filter: Oase Filtosmart 60
Inflow/outflow: ASG 10mm Stainless Steel Inflow/Outflow pipes
Light: Chihiros CII RGB or ONF Flat Nano - intentionally going for a short light for more of a spotlight effect with shadowing on the outer edges
CO2: Paintball setup, potentially mounted horizontally with brackets under the counter
Plants:
Glosso or HC carpet
Eleocharis parvula for height around the stones
Echinodorus 'Aflame" centerpiece plant
Livestock:
Blue dream neocaridina
Maybe chili rasboras
How does this setup sound? Very open to suggestions.
20 Replies
·
1005 views
Staff member
I Donated 2026
Founding Member
Well, as this thread exists in a few places, I figured why not have it here also. Perhaps we can take up the baton and keep it active and bring some value to hobbyists.
For those of you that don't know, I got into thinking much more about my micros when I read this thread on another forum. It was started by our very own @GreggZ. It was spurred into existence because of our own @Burr740 and his work with micro fertilizers. Some really good discussion followed and a lot was learned.
I don't want to steal Gregg's thunder with this so I hope he posts his current thoughts on the subject and we can all take it from there.
All the best,
Art
For those of you that don't know, I got into thinking much more about my micros when I read this thread on another forum. It was started by our very own @GreggZ. It was spurred into existence because of our own @Burr740 and his work with micro fertilizers. Some really good discussion followed and a lot was learned.
I don't want to steal Gregg's thunder with this so I hope he posts his current thoughts on the subject and we can all take it from there.
All the best,
Art
85 Replies
·
14421 views
Staff member
I Donated 2026
Founding Member
Hello Welcome, chillguy
Welcome to ScapeCrunch, @chillguy!
We would love to get to know you. Please tell us about yourself. What tank do you have?
We would love to get to know you. Please tell us about yourself. What tank do you have?
0 Replies
·
16 views
Journal Farmer D. Singh's journal
Ive reorganized the order of my tanks so I can better keep track of them ie. Tank 2 moss tank is now tank 3. This helps in any confusion I had when tracking tanks they are in a sort of order now. Rather than taking time editing my old journal id rather create a new thread. Pics will be current (for the most part) as they are posted. I am not aquascaping. I am just farming.
52 Replies
·
2652 views