Social Feed

Amazon prime day is less than 2 weeks away so I thought I'd start a thread in advance to discuss any bargains we might see.

The reason this came to mind now was that I just happen to be browsing for other things when I noticed this small curved edge low iron tank pop up. I would probably buy one of these if it drops even lower for prime day.

10 Gallon Ultra Clear Glass Rimless Curved Edge Aquarium

I don't know where I saw it, but I read somewhere that the US imports its CO2. So people were reporting not being able to get it because it is stuck in the Straight of Hormuz. Who knew? Seems weird to me. Anyway, yeah, it's open now, but it might take awhile to get back to normal supply levels. You might want to check with your vendor if you're getting low.

I came into some Hygrophila polysperma "white" by Tropica recently. Grew it out and it seems to be able to be shaped into good midground bushes so I decided to create a layout to showcase it. Contemplated whether to use it as the only white plant in the tank, but decided to use some Anubias white petite as well so that the white polysperma doesn't stand out awkwardly.

Title

Hi guys!

I'm new here, but not entirely new to planted tanks though I've been out of the hobby for the better part of the last decade between kids and moving a couple of times - but finally in a spot where I can do something again. I'm mostly going to be making things up as I go along, but plan on a lot of automation (I want to integrate everything into home assistant) and a lot of DIY as I love the challenge of building things out myself.

The starting point:

I picked up a 90P rimless, low-iron tank on a great deal.



I have a rough idea in my head for a stand to be built from plywood - just have a couple other house projects to finish off before starting that built.

Wife says I can only have one aquarium, so for this tank, I want to go all out with a sump to allow for auto top off, and auto water changes, auto fertilizer dosing etc. etc. I have half a plan in my mind.

I've also started on the light fixture which I've modeled up in CAD, and plan on making out of an 8020 extrusion, and some 3D printed bits.

I'm using bridgelux gen 3 thrive CW (3000k) and WW (5000k) LED strips which have super high CRI at 98+ along with some specific XPE2 wavelengths that I'll solder onto some starboards. Far Red (730nm), Red (654nm), Cyan (495nm), Blue (455nm), Visible UV (415nm). Each segment of the white channels will be on its own driver so I can adjust left to right brightness in thirds, and each colour channel on its own driver so I can vary each channel on a time-based approach.

These will be run from a custom PCB board with Meanwell N-LDD drivers, and will run ESPHome on an ESP32 so it can link up with my Home Assistant installation.


That's it for now, this will probably be a very slow build so be warned if you follow along!

Ive reorganized the order of my tanks so I can better keep track of them ie. Tank 2 moss tank is now tank 3. This helps in any confusion I had when tracking tanks they are in a sort of order now. Rather than taking time editing my old journal id rather create a new thread. Pics will be current (for the most part) as they are posted. I am not aquascaping. I am just farming.

This is the future home for the announcements when someone obtains an achievement badge. Let the games begin!

It's Christmas morning and the gift-receiving is coming to an end. What hobby-related gifts (if any) did you receive this holiday season?

Please share!

No aquarium gear for me this year but I did get a snazzy pair of shoes!

Inspiration, Goals, & Considerations

I've had an interest in aquariums since a young age and had my own aquarium with fish like Angelfish and Mollies around middle school. Growing up, my dad had a bigger tank with Blood Parrots and Silver Dollars. Over 10 years ago, I had a low maintenance 55 gallon planted tank. I was pretty proud of it, but always envied the high tech tanks I saw on forums/social media and told myself when I broke that tank down that the next time I set up a tank, it would be like what I envied. At the end of 2024, I set up a small low tech 5 gallon planted tank to help scratch my aquarium itch, which really only reaccelerated my desire for setting up a high tech tank. And now, here we are!

The size of the tank was mostly dictated by the space. I originally planned on something around 30 gallons, but my LFS had the UNS 75P in stock and after measuring and discussing with my wife, we agreed it would work for the space. The tank is between the kitchen and living room, which is essentially a play area for my son, so lighting needs to be adjusted to make sure he's not blinded by the light when looking up at the tank.

Generally, I'd like to have a visually pleasing aquarium with lots of fish and plants that's peaceful to enjoy. I'd like to automate / reduce as much friction as possible and I realize there's still plenty I need to learn, so I'll need to have patience when things go wrong. I want to keep away from anything that's hard to get out of the tank once it's in (duckweed, moss, pest snails, etc). I felt like sharing prices below might give value to anyone in the future that's looking to start where I did with a high tech tank.

Specs (prices include sales tax)
Tank:

Lighting:

Filtration:

Co2:

Inflow & Outflow Pipes:

Substrate & Hardscape:

Fertilization:
Battery Backup & Power

Other Misc Equipment:
Chihiros CO2 Drop Checker
5 x Oase ShutOff Valve 16/22
Inkbird WiFi ITC-308 - $38
SwitchBot Leak Detectors - $15 each

"Stand"
Because the guts are located in a kitchen cabinet, I didn't want to screw directly into it and damage it. I was also concerned silicone would not be able to dry and outgas properly when sealing the edges. I opted to line the cabinet with contact paper. It's essentially a giant sticker, so I lined the sides, bottoms, and a second layer over the bottom edges/joints. I built a 3 panel "stand" inside of the cabinet so I could house everything and screw into the plywood without any concerns. I used 1 sheet of 3/4" Maple plywood and coated 1 side with a latex primer followed by a layer of latex white paint. This is mostly for water resistance and not necessarily water proof. I placed a silicone cabinet liner under the right side equipment. I made a shelf to place the EcoFlow on so if there's a catastrophic leak it's off the bottom.

One consideration I hadn't thought about was how "cramped" the cabinet would be since I placed the EcoFlow on a shelf with a "wall", which essentially made the work area much tighter.

Cable Management: Raceway and cable clips
Water
Express Water RO5DX - $160
55 Gallon Brute Trash Can, 44 Gallon Brute Trash Can, 32 Gallon Greenmade Trash Can, and 2x dollys.
Plants (all UNS TC)

• Homalomena Sp Sekadau South (babysitter)
• Hydrocotyle Tripartita (potentially babysitter)
• Alternanthera Reineckii Rosanervig (initially planned as babysitter, but may keep some in long term)
• Hemianthus Callitrichoides 'Cuba'
• Rotala Rotundifolia Blood Red
• Anubias Nana Petite
• Micranthemum 'Monte Carlo'
• Alternanthera Reineckii 'Mini'
• Echinodorus Rose

Livestock:

Coming soon

• 25x Red Neon Blue Eye Rainbow
• 7x C005 Corydoras pantanalensis
• 3x C123 Yellow Cory 'Rio Nanay'
• Aphyosemion bivittatum 'Funge' Pair
• 5x Stiphodon rutilaureus Goby
• 1x True Siamese Algae Eaters
• 1x Bamboo Shrimp
• 8x Amano Shrimp

It's been a couple months and I could use a @Jeff Miotke fix. Any new videos in the works Jeff?