Welcome to ScapeCrunch
We are ScapeCrunch, the place where planted aquarium hobbyists come to build relationships and support each other. When you're tired of doom scrolling, you've found your home here.
Social Feed
Staff member
I Donated 2026
Founding Member
Although I am not a competitive aquascaper, I like to study the winning works to see what I can learn from them. This is all about art, not science. Science and husbandry will teach you to grow healthy plants. Art (no pun intended) is about using the healthy plants (and hardscape) to create something that truly speaks to you. As this is the IAPLC, the contest created by Takashi Amano, the creator of the "nature aquarium", I would assume each work should be trying to capture the idealized essence of nature.
With that in mind, what can we learn from this winning work?
Right off the bat, I can see this photo is perfect. Everything from the ripples on the water surface to the line of fish that seem to be coming into the cave works together. Reflection is kept to a minimum and used wisely in the shadows of the left side.Compositionally, the hole in the back is right on the golden ratio and the vanishing point is well defined. I can count 5 or 6 levels of depth making it seem VERY deep.
The plant choices are very good at working with the overall vibe to give you the ambiance that I think the aquascaper was going for. There are a couple of choices that go off script but overall they work very well.
Would you call this a nature aquarium, forest scape or diorama?
What lessons can you draw from this that you could apply to your tank?
4 Replies
·
5089 views
I’m considering adding an ATO to my UNS 60U mainly to keep the water level consistent from evaporation, especially when I’m away
I’ve narrowed it down to a few options like the Tunze Osmolator 3 Nano, XP Aqua Duetto², and FZONE QST2.0, but I’m open to other recommendations
My biggest concern is reliability and overfill protection. Since this is a relatively small tank, it wouldn’t take much of a sensor malfunction or pump running too long to raise the water level significantly. I’d really prefer something with a backup/failsafe or some type of protection that shuts the pump down if the primary sensor fails
I’m also trying to keep the equipment inside the tank as small and unobtrusive as possible. That’s one reason I’m hesitant about the Tunze Nano. I trust the brand, but the sensor assembly looks pretty bulky for a smaller rimless planted tank
For those actually running an ATO on a planted/freshwater tank:
What system are you using, how long have you had it, and have you ever had it overfill, fail to top off, or have sensor issues?
I’m especially interested in anyone who has used one of these long enough that they’d actually trust it while away on vacation
1 Replies
·
11 views
Staff member
I Donated 2026
Founding Member
Well, as this thread exists in a few places, I figured why not have it here also. Perhaps we can take up the baton and keep it active and bring some value to hobbyists.
For those of you that don't know, I got into thinking much more about my micros when I read this thread on another forum. It was started by our very own @GreggZ. It was spurred into existence because of our own @Burr740 and his work with micro fertilizers. Some really good discussion followed and a lot was learned.
I don't want to steal Gregg's thunder with this so I hope he posts his current thoughts on the subject and we can all take it from there.
All the best,
Art
For those of you that don't know, I got into thinking much more about my micros when I read this thread on another forum. It was started by our very own @GreggZ. It was spurred into existence because of our own @Burr740 and his work with micro fertilizers. Some really good discussion followed and a lot was learned.
I don't want to steal Gregg's thunder with this so I hope he posts his current thoughts on the subject and we can all take it from there.
All the best,
Art
90 Replies
·
16221 views
Supporting
I Donated 2026
Rockstar
Article Contributor
Skip to the actual journal here.
I'm known here for high tech, high nutrient, inert substrate scapes -- but I also love NO tech, rich substrate scapes, too!
This thread is three-sided:
But there is a new modern kind of fish bowl, one where plants, substrate, bacteria, water changes, and proper inhabitant selection all work together to create healthy, mini ecosystem-worlds in our homes:
My first bowl attempt in 2020
My second bowl, a true "no tech" in 2021
My third bowl scape (no tech) in 2023, and by far my favorite and most successful!
The point is, these are smaller, affordable, beautiful little worlds of light to enliven our living spaces and create art, nature, and beauty -- often with very little maintenance and upkeep besides a partial water change and feeding the fish.
quano_aqua on Insta
waterplantslover on insta
hanahiyori1112 on insta
Sono aqua pfm on Insta and on Youtube is one of the pioneers of this method, and
deserves a TON of credit for popularizing this technique across many Japanese communities!
kazuaki387 on insta
qball_aquatics on insta has many small bowl scapes.
Nanoscape on insta
syo_aqua_plants on insta follows the "Sono" method.
Aquadream in Vietnam on insta and on Youtube has TONS of no-tech bowl scapes.
Almost 20 bowls in his store/gallery. Lots of info on his youtube channel!
pokomama_medaka on insta
tinyecosystems_ on insta, also sells "kits" to make your own tiny ecosystem jars.
the_bettabowl_project on insta
MJ Aquascaping bowl on youtube, beautiful setup.
MJ Aquascaping vase on Youtube
MD Fishtanks on Youtube has done a few planted no tech bowls
aquashopuha on insta
jp72363 on insta
y0shi_n9 on Insta
kermitDE on Reddit
buiscape on insta has a tiny Fluval bowl scape with crabs!
nakayamachiyomi on insta
ichistarium on insta
chandan0616 on instagram
Few-Focus8050 on Reddit
KrishTheBaker on Reddit and on Youtube
@HardeeParty here on Scape Crunch
@bradquade here on Scape Crunch
10-gal bowl featured on Tank Tested on Youtube
And that's just the ones I have found over the last few years! I have no doubt there are many, many more out there.
I'll add to this thread as I find them, and would love it if you would, too!
I'm known here for high tech, high nutrient, inert substrate scapes -- but I also love NO tech, rich substrate scapes, too!
This thread is three-sided:
- To act as a journal for my new No-Tech bowl scape, and
- To act as a discussion board for no/low tech bowl scapes, and
- To collect and share accounts and examples of bowl scapes from around the world!
But there is a new modern kind of fish bowl, one where plants, substrate, bacteria, water changes, and proper inhabitant selection all work together to create healthy, mini ecosystem-worlds in our homes:
My first bowl attempt in 2020
My second bowl, a true "no tech" in 2021
My third bowl scape (no tech) in 2023, and by far my favorite and most successful!
What does No Tech mean?
In general, it means that these scapes have:- No Filter
- No Heater
- No Air Pump
- No Skimmer
- No CO2
- No Circulation
- A Light (usually low to medium-powered)
- A Substrate (inert, aquasoil, or sand-capped soil like Walstad method)
- Plants (usually quite low-tech plants, though a surprising number will thrive in this method!)
- Inhabitants (Since these bowls are usually between 2-12 gallons on average, this limits selection to nano fish, shrimp, and snails).
The point is, these are smaller, affordable, beautiful little worlds of light to enliven our living spaces and create art, nature, and beauty -- often with very little maintenance and upkeep besides a partial water change and feeding the fish.
Gallery and Links to bowl scapers:
quano_aqua on Insta
waterplantslover on insta
hanahiyori1112 on insta
Sono aqua pfm on Insta and on Youtube is one of the pioneers of this method, and
deserves a TON of credit for popularizing this technique across many Japanese communities!
kazuaki387 on insta
qball_aquatics on insta has many small bowl scapes.
Nanoscape on insta
syo_aqua_plants on insta follows the "Sono" method.
Aquadream in Vietnam on insta and on Youtube has TONS of no-tech bowl scapes.
Almost 20 bowls in his store/gallery. Lots of info on his youtube channel!
pokomama_medaka on insta
tinyecosystems_ on insta, also sells "kits" to make your own tiny ecosystem jars.
the_bettabowl_project on insta
MJ Aquascaping bowl on youtube, beautiful setup.
MJ Aquascaping vase on Youtube
MD Fishtanks on Youtube has done a few planted no tech bowls
aquashopuha on insta
jp72363 on insta
y0shi_n9 on Insta
kermitDE on Reddit
buiscape on insta has a tiny Fluval bowl scape with crabs!
nakayamachiyomi on insta
ichistarium on insta
chandan0616 on instagram
Few-Focus8050 on Reddit
KrishTheBaker on Reddit and on Youtube
@HardeeParty here on Scape Crunch
@bradquade here on Scape Crunch
10-gal bowl featured on Tank Tested on Youtube
And that's just the ones I have found over the last few years! I have no doubt there are many, many more out there.
I'll add to this thread as I find them, and would love it if you would, too!
64 Replies
·
5971 views
Hi all,
I recently got a second hand Kamoer F4 Pro dosing pump, but have some difficulty setting it up. The problem is the 'flow calibration'. Hopefully any of you has the same dosing pump and knows how to solve this issue.
As far as I can see, I installed all the hardware correctly and updated the firmware to the newest version. I replaced the in- and outlet hoses for new 3 (ID) - 5(OD) silicon hoses. Also did a factory reset in the app (two times already). The problem is when I calibrate a channel (already tried this with both channel 1 and 2), the calibration dose seems to high for the app to accept it. I tried both the 5 sec and 10 sec giving me accordingly a 10 and 20ml calibration dose. When I enter these doses, the app shows the message 'error setting parameter'.
When I filled in at 10 sec that it only 10ml (whereas it was 20ml), the calibration worked and saved successfully.
Edited later 11-10-26: I just tried the original hoses and the same problem occurs. Also get the exact same measures as with the new tubes
Do any of you know how to solve this?
I recently got a second hand Kamoer F4 Pro dosing pump, but have some difficulty setting it up. The problem is the 'flow calibration'. Hopefully any of you has the same dosing pump and knows how to solve this issue.
As far as I can see, I installed all the hardware correctly and updated the firmware to the newest version. I replaced the in- and outlet hoses for new 3 (ID) - 5(OD) silicon hoses. Also did a factory reset in the app (two times already). The problem is when I calibrate a channel (already tried this with both channel 1 and 2), the calibration dose seems to high for the app to accept it. I tried both the 5 sec and 10 sec giving me accordingly a 10 and 20ml calibration dose. When I enter these doses, the app shows the message 'error setting parameter'.
When I filled in at 10 sec that it only 10ml (whereas it was 20ml), the calibration worked and saved successfully.
Edited later 11-10-26: I just tried the original hoses and the same problem occurs. Also get the exact same measures as with the new tubes
Do any of you know how to solve this?
7 Replies
·
196 views
I recently added a small adjustable powerhead/wavemaker that's set to constant flow mode to increase surface agitation, gas exchange, and overall circulation. The goal wasn't to reduce CO₂, but to use stronger gas exchange along with adequate injection to get CO₂ up quickly before lights-on and then reach a stable equilibrium instead of continuing to accumulate throughout the photoperiod
Big thanks to @Dennis Wong / 2Hr Aquarist for his articles explaining this approach. I've learned so much from them. It's completely changed how I look at CO₂ injection and surface agitation
For testing I'm using a freshly calibrated Apera PH60 for pH, Hanna Checktemp 1 for temperature, and the Hanna HI3818 CO₂ titration kit to check actual CO₂ concentration. CO₂ kicked on at 12 PM, lights came on at 3 PM, and CO₂ shut off at 8 PM
Tank/water parameters: UNS 60U, Controsoil, RO/DI remineralized with APT Sky, GH 5 to 6, KH 0. My best degassed pH reference is around 7.30, so I'm seeing roughly a 1.7 pH drop at plateau. With 0 KH the standard pH/KH chart doesn't apply, so I'm using the Hanna kit alongside pH to track the curve
Today's testing showed a really good trend. The tank was already at pH 5.60 by 2:30 PM, reached 5.59 at lights-on, and stayed essentially flat through 8 PM. Hanna measured approximately 44 ppm at lights-on and 44 to 45 ppm at the end of the injection period. Since I was essentially at plateau 30 minutes before lights-on, I now feel comfortable reducing my pre-light injection from 3 hours to 2½ hours and seeing if I can still reach the same level by lights-on
My original CO₂ target was around 40 ppm, but at this point I'm wondering if it's worth trying to make a microscopic needle-valve adjustment just to knock off ~4 ppm when the curve is this stable
Would you guys leave it around 44 ppm or bring it down slightly closer to 40?
There's no livestock yet, so I'm taking advantage of this time to get everything dialed in. Plants are doing great. Planned livestock is cardinal tetras, pygmy cories, Amano shrimp, and eventually Caridina, and I'm planning to start stoc
king next week
11 Replies
·
282 views
I completed my first AGA contest photos for the Dutch category today!
What a PITA!!!
It took me a lot longer than I thought it would. Removing the tank equipment, cleaning the resulting mess, figuring out how to use a bunch of random cardboard to keep the light bleed off the camera...it was like a 4.5 hour affair for me in my cramped, sweaty office.
The other challenge was keeping the water clear with the filters off. Every time I thought I was ready to shoot I'd find one more leaf or stray piece of root hanging out somewhere on the surface or stuck in the moss or something. It's a lot more noticeable when the water is stagnant.
I'm glad to be done. I'm about 75% happy with how my tank turned out. Had a couple issues with plant selections but I think I made it work OK for my first entry. I'm really excited to see everyone else's tanks (and to finally start seeing them discussed on the forums). Good luck everyone!
What a PITA!!!
It took me a lot longer than I thought it would. Removing the tank equipment, cleaning the resulting mess, figuring out how to use a bunch of random cardboard to keep the light bleed off the camera...it was like a 4.5 hour affair for me in my cramped, sweaty office.The other challenge was keeping the water clear with the filters off. Every time I thought I was ready to shoot I'd find one more leaf or stray piece of root hanging out somewhere on the surface or stuck in the moss or something. It's a lot more noticeable when the water is stagnant.
I'm glad to be done. I'm about 75% happy with how my tank turned out. Had a couple issues with plant selections but I think I made it work OK for my first entry. I'm really excited to see everyone else's tanks (and to finally start seeing them discussed on the forums). Good luck everyone!
8 Replies
·
287 views
Staff member
I Donated 2026
Founding Member
Hello Welcome, deezin
Welcome to ScapeCrunch, @deezin!
We would love to get to know you. Please tell us about yourself. What tank do you have?
We would love to get to know you. Please tell us about yourself. What tank do you have?
0 Replies
·
15 views
There are lots of baby fish in my 20 gallon. They are from two different broods. The first had 2 grow up and the second has about 8. It is not certain which fish they are, but based on tail fin structure I am confident they are platys. Now the funny thing is, I am fairly certain my platys are all female. This is based on a knowledgeable guy at the LFS and my research into distinguishing between the two sexes. I have had the platys for less than 3 months, so they must have been getting it on in the fish store.
Anyways, I feel I am at my max bioload for my 20g tank and definitely don’t need one of the babies being a male and reaching sexual maturity. I have always had a kind heart for animals and can’t bring myself to eliminate them. Soooooo…….
Excuse for me to get another tank. This will be a temporary housing until they get old enough for me to sell or give away. Also lets me practice a little more aquascaping.
I started searching for smaller tanks on Prime Day, but ended up finding a great deal on Waterbox Clear Mini 6. So good I bought 2. My coral frag tank is getting an upgrade too! The Fzone nano light was on sale, and I thought for $60 it is worth a try. I set it up today. I really like the light. Very powerful, too powerful for my current needs. Very adjustable using a basic user friendly app.
This is my tentative hardscape. Suggestions and recommendations would be greatly appreciated.
Plants will be ready next week. I am using a few new ones and a few from my 20g. The plan is to make this heavily planted so that there will be very little maintenance and eventually only monthly water changes (if any). It will have a tiny nicrew HOB filter, but that is mainly for a little water movement.
Things should start to come together quickly over the next week.
Anyways, I feel I am at my max bioload for my 20g tank and definitely don’t need one of the babies being a male and reaching sexual maturity. I have always had a kind heart for animals and can’t bring myself to eliminate them. Soooooo…….
Excuse for me to get another tank. This will be a temporary housing until they get old enough for me to sell or give away. Also lets me practice a little more aquascaping.
I started searching for smaller tanks on Prime Day, but ended up finding a great deal on Waterbox Clear Mini 6. So good I bought 2. My coral frag tank is getting an upgrade too! The Fzone nano light was on sale, and I thought for $60 it is worth a try. I set it up today. I really like the light. Very powerful, too powerful for my current needs. Very adjustable using a basic user friendly app.
This is my tentative hardscape. Suggestions and recommendations would be greatly appreciated.
Plants will be ready next week. I am using a few new ones and a few from my 20g. The plan is to make this heavily planted so that there will be very little maintenance and eventually only monthly water changes (if any). It will have a tiny nicrew HOB filter, but that is mainly for a little water movement.
Things should start to come together quickly over the next week.
3 Replies
·
67 views
Staff member
I Donated 2026
Founding Member
Hello Welcome, alexamorgan
Welcome to ScapeCrunch, @alexamorgan!
We would love to get to know you. Please tell us about yourself. What tank do you have?
We would love to get to know you. Please tell us about yourself. What tank do you have?
0 Replies
·
12 views
Supporting
I Donated 2026
Rockstar
When I was walking around Aquashella Chicago, I crossed paths multiple times with Logan Rando while he was filming. I was wondering if he had posted a video of the show yet so I checked out his channel. No video of Chicago yet, so I instead watched his video of New Jersey. About half way through the video, Father Fish rolls by on his scooter and announces he'll be making an announcement that will destroy the tropical fish industry. LOL! I didn't know Father Fish was actually a speaker at Aquashella. Seems funny that a guy who preaches about not giving money to the aquarium industry was invited to speak. I figured WTH, I'll bite and go to his channel to see what the big news was. I couldn't bring myself to watch the whole thing, but I did scan through it and still don't know what the big Earth shattering news was. Just the same ole preachy stuff and I regret destroying the brain cells. I have to be more careful of that, as I'm older and can't afford to lose many more. I'm sure glad my path into this hobby was seeing the work of Takashi Amano, other knowledgeable aquascapers, and all the great folks in this community.
25 Replies
·
1096 views
