Social Feed

Hey all,

I’m setting up a new tank in Tasmania, Australia. I’ve had planted tanks many years ago in Sydney. To say the selection of equipment and plants here is limited, would be generous. While I can get lighting and filtration online, substrate is proving difficult. I’m going for a 90P (if I can get a low iron glass one here) so I need enough substrate to do the job. My options would be inert sand/gravel with root tabs or try an aqua soil of some variety. The only thing I can find locally to avoid huge shipping costs is Aqua Earth - which is stocked by a local fish supplier at about $60 AUD/6L.


Has anyone used this product before or have any reviews?

This tank is planned to have a few stem plants, various crypts, tiger lotus and hopefully a small carpet area of Monte Carlo or Marsilea and some pygmy chain swords (echinodorus).

Cheers
Chimera

My work tank was brought home for the summer. It is neat seeing these 2 tanks side by side. They are identical tanks but have very different looks.

Sadly, I can’t keep them both. I just have to decide which one to sell.

Inspired by the thread on CO2 controllers, and @Art experiment with modified pH probe / drop checker, I came up with what is to the best of my knowledge a new approach for our hobby.

I am not strong on the chemistry of CO2 in water, so it would be great if others chime in and comment if this approach makes sense.

Use the principle of Henry's law and fill the space under a closed aquarium lid with the correct concentration of CO2, using an affordable 65 USD sensor or similar with solenoid to release CO2 above the water. Control CO2 partial pressure so that the tank water will reach equilibrium with this gas pocket at about 30 ppm in the water. This would allow for very stable CO2 in the tank, and a big saver in CO2 as we don't rely on the outgassing via surface agitation to achieve stability. Besides that, it will be only weakly dependent on water chemistry (this may need to be tested and/or confirmed/quantified by chemists, as the chemistry and temperature do have some influence on CO2 solubility?).





Notes:

• My first thoughts/estimations are that one can reach 30 ppm in the tank water very fast, and have probably more than 90% savings on CO2 consumption. As we now measure CO2 in the gas pocket, independent of water chemistry, it would (hopefully) also be the first time that we can forget water chemistry as a major factor, complications with pH probes and using pH as a proxy, and indeed know the real water CO2 ppm more accurately and with less risks of misinterpretations of measurements.
• We don't need a precision expensive CO2 regulator anymore, no diffuser or reactor, no pH probe or drop checker. Just a sensor with electronics that switches a solenoid on and off. It would probably be good to have a simple air pump added, so that O2 and other gasses can exchange, but this would give very low CO2 losses.

From a physics and chemical perspective the approach is very similar (in reverse) to what professional dissolved CO2 probes do (see attached: measure CO2 concentration in a gas pocket that is in equilibrium with water), so that gives me some confidence that the above will work. However I am not confident that my understanding of chemistry of CO2 in water is good enough, and I may miss important aspects. Hope others chime in, and help to quantify if the chemistry is a minor or perhaps a major complication.

Attached file: Datasheet explaining the principle and use of a dedicated dissolved CO2 meter (for most in the hobby too expensive, but similar scientific principles applied as in above ideas).

After a bit of hiatus from the hobby, I'm jumping back in with a high-tech UNS 60S as a pond type scape. Normally one would have a nice set of images next with the initial setup. Currently mine is an empty tank and shelves of parts and equipment. I'm determined to take it slow, research each bit and have everything on hand before adding water.

I've found the in the past ~20 years there has been quite a lot of change in the hobby. So many more products available, my last high-tech tanks was T5's and Metal Halides. My have things changed.

My Plan

Tank /Stand​

UNS 60S

Lighting

Chihiros WRGB II Pro 60
Chihiros WRGB II Pro 60 Light Shade /w Mirror
Chihiros WRBG II Pro LED Light Hanging Kit
Week Aqua Arm Stand /Black (L Stand)

Filtration​

Oase BioMaster 2 Thermo 250
Oase Shutoff Valve 16/22 mm - x 2
FZone 3M Grey Tubing 16/22 mm
Stainless Steel 16/22 to 12/16 reducer
FZone 3M Grey Tubing 12/16 mm
FZone Mini Lily Pipes w/ Skimmer

I found that to use Lily pipes that fit this tank size, I'll need to use something small, hence the reduction in tubing size.

CO2​

5 LB CO2 Tank
CO2 Art Dual Stage Regulator /w Bubble Counter and Solenoid
FZone CO2 Proof Line
CO2 Check Valve
NilocG CO2 Drop Checker /w Solution
Timer
Qanvee M2 Inline CO2 Diffuser

Lucked out with CO2, found someone on Facebook Marketplace selling 2 complete CO2 systems. With full tanks, for less than the price of a new CO2 Art Regulator. Snapped them both up.

Hardscape​

Rock - Black Lava Rock
Wood - Dragon Wood

Substrate

APT S - Base layer
UNS ControBase 2L
APT Jazz Caps
UNS ControSoil Black Fine 10L
UNS Mojave Extra Fine 8L- Open areas
UNS Sequoia 3L - Accent Rocks

Plants​

Rear Middle
Hygrophila pinnatifida
Ceratopteris thalictroides
Ludwigia palustris var Super Red

Under Wood and Rock
Cryptocoryne parva var Mini
Bucephalandra (assorted varieties)

On Rock at Water Line
Micranthemum callitrichoides var Cuba

Left and Right Sides in Sand
Eleocharis acicularis var Mini
Hydrocotyle verticillata

Floaters
Red Root Floater

Livestock​

Wish List: at this time, nothing is set in stone
Shrimp
Pygmy Cory
Otocinclus
Exotic Pleco
Red Neon Blue Eye Rainbowfish
Badis? Once plants grow in
Goby
Snails

That's the plan.

Started collecting bits in April, then found out I'd have to be in Dallas for most of May for some family matters. While in Dallas, Aquashella was in town along with an aquascaping demo of an LFS, Fish Gallery, by MJ Aquascaping of YouTube fame. Being my plan is based on the Guppy tank MJ created, I could not miss this opportunity. Learned a lot and had the opportunity to ask MJ a lot of questions.

My intention is to Dark Start, then plant.

I'm held up by the need of one part. The Week Aqua Arm Stand /Black (L Stand) base is too wide for this tank. In need of a 3 mm spacer. My neighbor, a metal shop, made me one out of ABS plastic. It works perfectly, only they made only one. I need two. My fault for not being clearer. I'll hit them up once they are back in the shop after the weekend.

More to come...

This is made for pond Lily's and pond plants. Looked at the label and it seems pretty ideal.


Anyone tried it? It's fairly cheap for our use. I don't think I saw too big a difference when I used it but I also only added a few dozen pellets to a 20 gallon.

As I look at the topcis in the algae forum, it seems a lot of us battle this one.

1. Manual removal has mine back to minimal mostly in the crowns of a few plants and some spots on the substrate. I have an air stone running at night. It smells funky when I get close to the tank. I am taking it as a sign the emycin is working. What thinks you?

2. Something I read on using emycin said you must dose it at night. I think I saw it only in one place. Any ideas why someone might think that was the case? To me, antibiotics are going to work best when the algae is growing and active. That's how they work is by disrupting some process in the life cycle. My cyano contracts and almost disappears when the lights are off. Not a sign it is metabolically active. Am I missing something or is this just someone's questionable opinion?

3. I've increase aeration. I have lots of flow. I've manually removed most of it. I'm adding emycin. I try to keep my NO3 around 15. I'm going to test it before my weekly water change to make sure it isn't bottoming out, but for weeks, it's been fine. Is my NO3 high enough? Anything I'm missing?

Welcome to ScapeCrunch, @FreshTides_Neal!
We would love to get to know you. Please tell us about yourself. What tank do you have?

Era of AI slop is truly upon us. Firstly, no one holds the Oxyguard analyzer's probe as it takes 15-20mins to get a reading.
Size of the box is wrong and no shadows below the box, caps missing and a strap that goes nowhere. Aquarium looks fake as well. Real pic below for comparison.

Both tanks contain a lot of bucephalandra stems I have recently melted by feeding my caridina tanks with mulberry leaves. I have no idea what the heck happened but all buces melted in those tanks heavily over 3 days with every other plant + shrimp being fine. Don't wanna risk the plants dying so I'm throwing them back into high tech for a few months to recover.

Set Up:
Both tanks uses heavy co2 misting
Horticulture LED lights (dimmed, so probably 25-30 watts?)
Will steadily increase light weekly if I see no issues, max is 40 watts.
Dual sponge filters. (Air bubbles help prevent co2 gassing, also seems to really help stabilize tank, so less algae)
1 Internal filter with an atomizer for misting.

Regime:
All tanks get a 30-50% water change, twice per week.
Micros dosed daily (unless I forget, which happens fairly often.)
Macros Front Loaded and only in new incoming water.

6 Gallon bucket water change:
~350tds (Using seachem equilibrium remineralizer)
~22ppm KNO3, using KNO3 + KH2PO4
~40-50 ppm Potassium due to remineralizer
~4-5GH

Buce Lottery Colors
Lots of buces, various names, collected over the years. A lot of them were ultra rare and I cannot buy them anymore. Most of the ultra rare I probably accidentally killed from trying to grow them in a "no filter, no co2" style tank. Either way, not much color in low tech, will see what lottery colors we pull once they get going with better colors in higher lights + co2.

Both tanks are planted tightly front to back with bucephalandra. Kinda hard to see it all with moss blocking the way, but my view will be your view.

Random Mosses
Some mosses I've collected as well, honestly I grow a lot of them free floating so they kinda look the same. We will find out how they look after I attach them to something.

15 Gallon, very aged sand + pebble tank.

20 Gallon long, aged aquasoil I pulled from an existing caridina tank.


Wanted to take some macro shots, but does anyone know how to take an angle show on the glass without distortion? I have a DSLR long tube lens that works under water but color rendition is really bad.

Why so much moss?
Mostly to help stabilize the tank and to reduce light bleed. Less surface for algae to grow.

Welcome to ScapeCrunch, @Chimera!
We would love to get to know you. Please tell us about yourself. What tank do you have?