Social Feed

Hey all!

Perhaps you guys have some ideas for me. I'm looking to upgrade a couple of my current lights, which are Fluval Aquasky 2.0's.

My first attempt at upgrading was getting a Twinstar 1200EA V. But with that light I ran into a problem: it made my tank very disco-y! The separated-out colors (somewhat of a defining feature for twinstar lights) didn't properly blend in my setup, resulting in colored dots of light dancing around everywhere. It looked very unnatural.

I have plenty of surface agitation, so having a shimmer effect is expected. But under these circumstances the fluval lights (which are RGBW) never gave me problems with color separation, while the twinstar did.

So what could be some good quality lights (mid segment and up) that work well for tanks with a lot of surface agitation? I assume that color blending plays an important part here.

It will be for a low tech tank that currently doesn't require too much in the way of PAR. An overpowered light I can dial back is fine. I prefer a mostly natural look over heavy color boosting.

I'm currently considering something like a Skylight Entriq. A bit on the expensive side, but who knows. Appreciate any input!

Hi guys!

I'm new here, but not entirely new to planted tanks though I've been out of the hobby for the better part of the last decade between kids and moving a couple of times - but finally in a spot where I can do something again. I'm mostly going to be making things up as I go along, but plan on a lot of automation (I want to integrate everything into home assistant) and a lot of DIY as I love the challenge of building things out myself.

The starting point:

I picked up a 90P rimless, low-iron tank on a great deal.



I have a rough idea in my head for a stand to be built from plywood - just have a couple other house projects to finish off before starting that built.

Wife says I can only have one aquarium, so for this tank, I want to go all out with a sump to allow for auto top off, and auto water changes, auto fertilizer dosing etc. etc. I have half a plan in my mind.

I've also started on the light fixture which I've modeled up in CAD, and plan on making out of an 8020 extrusion, and some 3D printed bits.

I'm using bridgelux gen 3 thrive CW (3000k) and WW (5000k) LED strips which have super high CRI at 98+ along with some specific XPE2 wavelengths that I'll solder onto some starboards. Far Red (730nm), Red (654nm), Cyan (495nm), Blue (455nm), Visible UV (415nm). Each segment of the white channels will be on its own driver so I can adjust left to right brightness in thirds, and each colour channel on its own driver so I can vary each channel on a time-based approach.

These will be run from a custom PCB board with Meanwell N-LDD drivers, and will run ESPHome on an ESP32 so it can link up with my Home Assistant installation.


That's it for now, this will probably be a very slow build so be warned if you follow along!

Time to start a new thread.

I’ll fill in some details later, but I’m working on the hardscape now. Any and all criticism is appreciated. The vision is nothing more, and nothing less, than something appealing to the eye.

90cm x 30cm x 30cm Lifegard Aquatics ultra clear bookshelf tank. Buce and anubias on the hardscape, stems towards the back and center, mid to front carpet with some changes in shade and texture down to a flat grade on the right side of the tank.

Lily pipe inlet and skimmer will be in the back left corner with the outflow in the front left to hopefully achieve circular flow. I’ll be running an in-line diffuser. Light will be the P600 Pro that I regrettably did not upside to 900. Oh well. I’ll mount it high and hopefully it’ll have enough spread.

I have some dragon stone and red lava rock rubble I’ll use at the base to blend into the substrate, as well as some stratum I may or may not cap with.

Well, as this thread exists in a few places, I figured why not have it here also. Perhaps we can take up the baton and keep it active and bring some value to hobbyists.

For those of you that don't know, I got into thinking much more about my micros when I read this thread on another forum. It was started by our very own @GreggZ. It was spurred into existence because of our own @Burr740 and his work with micro fertilizers. Some really good discussion followed and a lot was learned.

I don't want to steal Gregg's thunder with this so I hope he posts his current thoughts on the subject and we can all take it from there.

All the best,

Art

This is where I started.
Thread 'What am I doing wrong?' Help - What am I doing wrong?

A new plan is formulating.
I have 50+ lbs of washed BDBS ready to go in.
I also purchased a new Aquael Ultramax 1000 canister filter.
The plan is to let the filter run for a month. Then at some point swap out the existing gravel with the BDBS. I'll continue to run the new canister as well as the existing HOBs for another month after the substrate swap and then retire the HOBs.
I have to wait at least a month to let the new canister develop a bacteria colony and also the BDBS is in 5 gallon buckets in my shed and it's currently frozen into a solid block.

After the tank is stable, only then will I add plants. I plan on going the CO2 route this time. I'm looking at adding a GLA or a CO2 Art inline diffuser.

Which bring me to.my first question. I've tried to think about this logically. Due to space my canister filter sits on the right side of my tank, not underneath.
What side do I want to put my intake and output? I was thinking of putting the inlet on the right side since it will be almost a straight shot via gravity directly into the filter. The outflow, which will be a spray bar, would be on the left side. That would give more contact time between CO2 and water after the inline diffuser, however that longer output length would likely also slow flow some as their is a longer run of hose and more head height. But I think the more contact time the more the CO2 diffuser into the water before going into the tank. Am I thinking about this correctly?

Trying to see which light to choose for Pond style scape on a 60 shallow tank.

My needs

• Planning for emersed growth, needs to be able to positioned high.
• No Co2
• Do not need to be powerful - area gets quite bit of sunlight
• Not sure if it would be a triangular or island layout.

Netlea 6S Bracket Light Gen 3 - most likely 30 W

Fzone Axon 72W

The Netlea is considerably taller and will have better coverage, but both don't have much reviews.

Any recommendations appreciated.

Thank you.

This is the future home for the announcements when someone obtains an achievement badge. Let the games begin!

My wife and I agreed we'd ideally be moving in the next 6-12 months. There's the possibly it could be sooner if the right place pops up, and could possibly be longer, although not ideal. This has made me pause and reconsider setting up my 120p in this house (and a 20 gallon too!). The thought of having the tank up and running for possibly a short period of time before having to break it down and move it sounds pretty terrible compared to moving all of individual components. I currently have my 75p, so I'm not tankless and would need to move that.

Location would still be in the same general region (20-40 mile radius) and we'd likely maintain overlap between homes for a 1 month.

What would you do?

Long-time lurker in the hobby. I’ve been chewing on an idea for a website (maybe a weekly newsletter too) that’s focused purely on curated aquascape inspiration — not another feed to scroll, but something with an actual point of view: why a scape works, what makes the hardscape/planting choices interesting, styles worth studying, that kind of thing.

Before I build anything, wanted to ask people who’d actually use it:

• Where do you currently go for aquascape inspiration — Instagram, YouTube, forums, contest archives?

• Does that already fully scratch the itch, or is there something missing (context, explanation, curation vs. just a feed)?

• Would a smaller, curated site/newsletter add anything for you, or does it feel redundant with what’s already out there?

• Would you ever visit or subscribe to something like that regularly, or is it a “look at once, forget” kind of thing?

Genuinely trying to figure out if this fills a real gap or if I’d just be adding noise to a space that’s already well served. All takes welcome, including “this already exists” or “nobody needs this.”

Welcome to ScapeCrunch, @Cool81!
We would love to get to know you. Please tell us about yourself. What tank do you have?