Social Feed

I came into some Hygrophila polysperma "white" by Tropica recently. Grew it out and it seems to be able to be shaped into good midground bushes so I decided to create a layout to showcase it. Contemplated whether to use it as the only white plant in the tank, but decided to use some Anubias white petite as well so that the white polysperma doesn't stand out awkwardly.

Inspiration, Goals, & Considerations

I've had an interest in aquariums since a young age and had my own aquarium with fish like Angelfish and Mollies around middle school. Growing up, my dad had a bigger tank with Blood Parrots and Silver Dollars. Over 10 years ago, I had a low maintenance 55 gallon planted tank. I was pretty proud of it, but always envied the high tech tanks I saw on forums/social media and told myself when I broke that tank down that the next time I set up a tank, it would be like what I envied. At the end of 2024, I set up a small low tech 5 gallon planted tank to help scratch my aquarium itch, which really only reaccelerated my desire for setting up a high tech tank. And now, here we are!

The size of the tank was mostly dictated by the space. I originally planned on something around 30 gallons, but my LFS had the UNS 75P in stock and after measuring and discussing with my wife, we agreed it would work for the space. The tank is between the kitchen and living room, which is essentially a play area for my son, so lighting needs to be adjusted to make sure he's not blinded by the light when looking up at the tank.

Generally, I'd like to have a visually pleasing aquarium with lots of fish and plants that's peaceful to enjoy. I'd like to automate / reduce as much friction as possible and I realize there's still plenty I need to learn, so I'll need to have patience when things go wrong. I want to keep away from anything that's hard to get out of the tank once it's in (duckweed, moss, pest snails, etc). I felt like sharing prices below might give value to anyone in the future that's looking to start where I did with a high tech tank.

Specs (prices include sales tax)
Tank:

Lighting:

Filtration:

Co2:

Inflow & Outflow Pipes:

Substrate & Hardscape:

Fertilization:
Battery Backup & Power

Other Misc Equipment:
Chihiros CO2 Drop Checker
5 x Oase ShutOff Valve 16/22
Inkbird WiFi ITC-308 - $38
SwitchBot Leak Detectors - $15 each

"Stand"
Because the guts are located in a kitchen cabinet, I didn't want to screw directly into it and damage it. I was also concerned silicone would not be able to dry and outgas properly when sealing the edges. I opted to line the cabinet with contact paper. It's essentially a giant sticker, so I lined the sides, bottoms, and a second layer over the bottom edges/joints. I built a 3 panel "stand" inside of the cabinet so I could house everything and screw into the plywood without any concerns. I used 1 sheet of 3/4" Maple plywood and coated 1 side with a latex primer followed by a layer of latex white paint. This is mostly for water resistance and not necessarily water proof. I placed a silicone cabinet liner under the right side equipment. I made a shelf to place the EcoFlow on so if there's a catastrophic leak it's off the bottom.

One consideration I hadn't thought about was how "cramped" the cabinet would be since I placed the EcoFlow on a shelf with a "wall", which essentially made the work area much tighter.

Cable Management: Raceway and cable clips
Water
Express Water RO5DX - $160
55 Gallon Brute Trash Can, 44 Gallon Brute Trash Can, 32 Gallon Greenmade Trash Can, and 2x dollys.
Plants (all UNS TC)

• Homalomena Sp Sekadau South (babysitter)
• Hydrocotyle Tripartita (potentially babysitter)
• Alternanthera Reineckii Rosanervig (initially planned as babysitter, but may keep some in long term)
• Hemianthus Callitrichoides 'Cuba'
• Rotala Rotundifolia Blood Red
• Anubias Nana Petite
• Micranthemum 'Monte Carlo'
• Alternanthera Reineckii 'Mini'
• Echinodorus Rose

Livestock:

Coming soon

• 25x Red Neon Blue Eye Rainbow
• 7x C005 Corydoras pantanalensis
• 3x C123 Yellow Cory 'Rio Nanay'
• Aphyosemion bivittatum 'Funge' Pair
• 5x Stiphodon rutilaureus Goby
• 1x True Siamese Algae Eaters
• 1x Bamboo Shrimp
• 8x Amano Shrimp

It's been a couple months and I could use a @Jeff Miotke fix. Any new videos in the works Jeff?

Amazon prime day is less than 2 weeks away so I thought I'd start a thread in advance to discuss any bargains we might see.

The reason this came to mind now was that I just happen to be browsing for other things when I noticed this small curved edge low iron tank pop up. I would probably buy one of these if it drops even lower for prime day.

10 Gallon Ultra Clear Glass Rimless Curved Edge Aquarium

Era of AI slop is truly upon us. Firstly, no one holds the Oxyguard analyzer's probe as it takes 15-20mins to get a reading.
Size of the box is wrong and no shadows below the box, caps missing and a strap that goes nowhere. Aquarium looks fake as well. Real pic below for comparison.

Tried to open the app to change a setting. Goes to a login screen. Checked Chihiros support, and it seems to be an issue with the latest version of the app. The issue appears to be widespread.

Discussion on the Chihiros site.

For a few years I have been using NilocG EI Based DIY ferts.



This is a kit that comes with a 500 ml bottle for both Macros and Micors as well as three sets of each salt mix.
Last week I mixed up a batch of ferts.
I sterilized both bottles in boiling water.
I used distilled water as always for my mix. I even heated up the distilled water before pouring in the bottles so the salts would dissolve better.
Everything dissolved fine with vigorous shaking.
The instructions for the Micros say there is a possibility it may grow mold and so to prevent mold the offered solution is to add 10ml of Excel or store the Micros in the refrigerator. I opted to keep them in the fridge, why would I buy a bottle of Excel just to use 10ml?
The problem is, and this has been a recurring problem, the Micros seem to turn back into solid chunks. I mean I have particulates and larger solid pieces in the Micros mix.
I can't help but feeling my plants are missing out on nutrients when everything is not totally dissolved in the water.
Any thoughts? Any similar experiences? Any solutions? Should I just switch ferts?

This is the future home for the announcements when someone obtains an achievement badge. Let the games begin!

I know stainless isn't 100% impervious to rust, but I try to let my tools dry out after use and mine have a bit of rust.
I'm frustrated because.... you know.... we all want pretty tools.
I thought I had quality stuff, but now I'm not sure, or I didn't let them dry good a few times.
Do yours rust or do I have tools?

I purchased the new Netlea AT6 Pro from Aqua Rocks Colorado. I've been using it for about a month now so I wanted to get a thread going for those that take the plunge, like me, and purchase a Netlea product.

Netlea is a Chinese company, as far as I know, that has a series of lights. They seem to have been in the busy for quite a while. The AT6 Pro is their high-end model.

When I compared the price versus what you get and then looked at the Week Aqua, Chihiros, and others, it just made sense to take a chance on the Netlea. The power is insane and you're able to adjust the spectrum to RGB which is what I was looking for.

I know @Dennis Wong had a unit en route to him for testing. I'm anxious to see what he has to say about it. PAR it seems to have plenty of.

My experience so far

The app leaves a lot to be desired but it is easy to use and hasn't given me any problems. It has active cooling but I don't hear the fans. So, I'm very satisfied so far.

One thing that I really like about this unit is that it is BIG. It provides an even coverage of light over my entire surface area. It has a built in diffuser so I am assuming that the blending will be top of class as well.

@GreggZ is kind enough to let me borrow his PAR meter that I'm anxiously awaiting. I'm currently running it at about 96w. Let's see what the meter reads throughout the aquarium.

While I know many in this community are diehard T5 users, sooner or later getting a hold of the bulbs will become more and more difficult. At some point, you all need to start looking for LEDs. I think this one has a lot of the benefits you get from T5 and the power to back it up.

Anybody else out there thinking of purchasing a new LED? Would you consider one of these new entries?