Social Feed

I’m looking for some help troubleshooting hair algae that’s absolutely destroying my Wallichii.

The Wallichii was planted as tissue cultures when I first rescaped the tank. The hair algae is heavily attached to the stems and manual removal hasn’t been very successful—it doesn’t want to let go of the plants.

My biggest concern right now is honestly the algae. I know my CO₂ isn’t where I want it to be, but the algae is getting bad enough that I’m worried it’s going to kill a huge portion of the Wallichii before I get everything dialed in.

Current setup:
UNS 20
Chihiros Hyperspot at 100 percent
Photoperiod: 7:30 AM–3:15 PM
Apt 3 1 pump per gallon during weekly water change
CO₂ via inline atomizer
Parameters (5/30):

• pH: 6.6
• NH₃/NH₄: 0
• NO₂: 0
• NO₃: 20–30 ppm
• GH: 14
• KH: 4
• TDS: 323
• CO2: 65ppm midway through photo period

I’m also struggling to get my CO₂ dialed in consistently. The CO₂ reading was about 65 ppm around the middle of the photoperiod, but I had just turned the bubbles per second down because it was clearly too high. If I lower it enough to avoid overshooting, it seems perfect at lights-on but ends up too low by the middle of the day. If I raise it enough to maintain levels later in the photoperiod, I overshoot and end up where I am now.

I’ve tried manually removing the algae, but it’s so attached to the Wallichii that I can’t really get it off without damaging the plants.

At this point I’m trying to figure out:

• Is this primarily a CO₂ stability issue?
• Is the Hyperspot too much light for this tank?
• Should I be aggressively trimming/removing affected stems?
• What would you do to stop the algae before it wipes out the Wallichii?

Any advice would be appreciated. I’m feeling like I’m chasing multiple problems at once and the algae is winning.

Welcome to ScapeCrunch, @astrobooger!
We would love to get to know you. Please tell us about yourself. What tank do you have?

Finally a journal.

I’ll soon be setting up two new tanks, a UNS 90p and a 50c. (Not so!) Patiently awaiting tanks and stands delivery.

They will both be middle energy tanks. I have lengthy periods of busy time and travel that mean the tanks need to survive without human intervention here and there. So plenty of automation is needed, and slow and steady wins over high energy. Or in BBQ smoking terms: low and slow.

Plans:

• Injected CO2, but less than 30ppm
• Inert gravel
• Tidal HOB filter and partial UGF plate.
• Less than EI ferts, but more than PPS pro.
• Tap water (my tap is 50 TDS and only 10ppm Ca) remineralized to 30ppm Ca and 3-4 dKH.
• Lower light levels: Week aqua L on 90p and Chihiros wrgb 2 slim on 50c.
• Easy slow growing plants, and a few fish. Thinking the 50c will be a shrimp tank.
• Some hardscape but nothing crazy

My last tank has had a rough year. Hurricane Helene meant two weeks with no electricity, and much longer without decent water changes.

Then last summer the tank developed a slow leak while I was out of town (ugh!). Had to fly home for a week to triage. Fish and plants have been in temporary tanks. Plants are struggling. Photo is when they had already been in temporary bin for over 6 weeks, I was surprised it didn’t look like an algae infested swamp.





Sooo ready for my new tanks! These are my first really nice tanks, I’ve only owned petco specials before.

For the new tanks I'm planning on over ordering plants since my surviving plants are clearly pretty weak at this point.

Has anyone grown the pearl varietal? Is this the correct form for the plant? Does it colour up more or does the top side of the leaf stay green?

Hello all, my name is Mike and I just found this site by accident. I think @gjcarew told me @GreggZ had moved here but some how I failed to remember; so I'm glad I found this site today. I am a fan, as you can tell, of GreggZ. He taught me just about everything I know (through his journal on that other site) and I was also banned over a 0dKH discussion . So you know, I kind of feel close to the guy. Joking aside, I was able to go from this.
To this within a short period of time just by reading his journal.
And as time passed I was able to get this nice scape that made my wife happy.


Then I had the pleasure to meet @gjcarew over on a different site and I reached out to him with questions and such; through those conversations he motivated me to make an attempt at the 2022 AGA Dutch competition. Unfortunately, I messed the tank up right when I was about to take my photos and I couldn't recover the tank in time. Here's that tank. Obviously, there are tons of problems with it, but I was proud of it regardless. I believe it had a shot at a top 10. Not really.
I messed up the Myrio and started to get algae because I wasn't front loading properly and I didn't realize it. I believe I went too lean and thought the Landen would cover the difference.

I won't lie, I felt completely defeated and I kind of slowed down on all my tanks and didn't put my full attention into them anymore. Also, my wife and I were getting a bit burned out with so many tanks to maintain. This is where my journal begins.

I wanted a solution to reduce our work load, and I definitely wanted a bigger tank to house my livestock from the other tanks. I was also sick of lugging canister filters around the house then plugging them to realize I forgot to connect a tube. Fountains of water on our walls wasn't working out so well! I also wanted absolutely no water outside of the tank. By chance, I found the Innovative Marine SR Pro2 120 and bought it.

Now here's the cool thing that happened. I was using a 20 inch RO housing for my reactor, but the tank is only 16 inches high. Four inches of Cerge's reactor was incredibly ugly. And again, by chance, I found the solution. Enter the Yugang Horizontal reactor. I affectionally call it by his forum name because I couldn't be happier with how amazing this thing is. It's so simple, yet so brilliant. I reached out to Yugang and asked if he got the reactor to work. He replied with "my CO2 spray bar works so well I never tried it". I then asked if anyone else got it to work and he said no one has tried it. So I told him I would and apparently, I really am the first person to run this thing through some trials. I think that's pretty cool honestly! Yugang made some calculations for me and on the second build, we nailed it. I get a 1.5pH drop and the design makes it so no additianal CO2 can be added. It's seemingly impossible to gas my fish as the reactor has safety built into the design length. Amazing! I'm so glad there are so many people smarter than I am. It makes my problems so much easier to manage .

The reactor is nothing more than cheap PVC with a gentle stream of tank water flowing under a pocket of CO2. Add a cheap bypass and a method of injection and you now have a Yugang reactor. This success has energized me enough to have another go at the AGA. I bought new lights (Weak Aqua P600's), jammed as many plants I could into the tank and I'm starting my plant selection now. I have a long ways to go but I'm hoping to achieve my goal. The tank is nothing to look at right now; getting plants here in Albuquerque is quite the challenge so I'm mostly waiting on submerge growth and to get them propagated. I also have way too many species but the selection process has begun. I just need to see which ones will grow in Ace Hardware pool filter sand. So far, all seem like they are coming along fine in the sand.

Oh, here's the reactor.

And here's the really ugly tank in it's current condition.


I promise, it will look much better soon. It's been a scramble to pull everything together so quickly.

I hope some of you follow along; I know I will have tons of questions soon enough for all of you!

Well I’m done talking about it, it’s time to get this journal started.

I have been really out of it the last year or so in terms of maintaining my own tank, mainly out of frustration with time constraints and inconsistency with dosing etc. However, I have now acquired a dream tank, rimless and with low iron glass like I’ve always wanted. While I loved having a sump and prided myself on putting it together, I’m past that desire. The AIO allows the same benefits with hiding equipment, and overall easier maintenance without climbing in and out of cabinets. Now onto the details of this build.

Tank: Planet Aquariums Tideline 62 Gallon AIO Lagoon

Filtration: (2) 250gph pumps on either side of the tank with center overflow into socks (I’m going to punch holes in the socks for now and stuff with polyfill, reviews state the socks clog way too quickly and there is no replacement sock as the insert is not the common round style). The baffles will be stuffed with the poret foam I have already from my sump for extra mechanical/biological.

Substrate: The bottom layer will comprise of bagged pond soil/peat/earthworm castings/ STS. This will be a thin layer and will mainly act as filler to raise up the cap of APT Feast. This is similar to a substrate setup I did when I first started back up in 2020, And that tank did very well. While capping with sand and relying on the dirt to feed the stems worked well, it did require a little more effort on my end with dosing. I don’t trust myself to be as diligent as some members on here are with their inert subs, so I’m taking the mulligan and using aquasoil as a cap, hence, “dirty soil.” This will be another island style layout, and the surrounding substrate will be comprised of Caribsea Carolina Creek Sand.

Hardscape: River rock (local hardscape center sourced) and malaysian driftwood. I have recently acquired another large piece of wood and I’m sourcing new stone this week, as what I have just isn’t meshing with my current vision for the tank.

Plants: …. I have not solidified my vision of what this scape will look like just yet as I haven’t been able to setup the hardscape to outline the island. The plan is to use a good amount of colorful stems, epiphytes, and potentially moss.

Lighting: I will be ordering the Week Aqua Z400 this week and am excited to test it out.

That’s all for now, more pictures and details to come. I should hopefully have the hardscape setup by the end of this coming week after acquiring more stone and wood.

CO2: Almost forgot, for Co2 injection I have made a DIY Yugang with a locking food storage container. It will be stored in the cabinet and the hook will feed into the return pump chamber on the right. I initially was bummed that I had to sacrifice storage to fit a 5lb CO2 tank under the stand, which also meant getting rid of of the 20lb tank I’ve only been having to fill twice a year. @GreggZ Will appreciate this, my awesome father in law suggested that I hide the co2 tank in the pantry closet which is directly behind that wall and just drill a hole for the co2 line. Since my father in laws word is pure gold in my wife’s eyes, that suggestion was approved! He’s just as much my dad too so I appreciated him supporting the project

Hello everyone,

Excuse my multiple posts - I'm new here and trying to determine the best way to ask all of my questions!

As I have stated in a few other posts, I am starting a high-tech, 235g planted tank. Tank dimensions are 72" L x 30" W x 25" H.

I'm still working out many of the details, but for now I plan to make this a South American themed tank centered around a few Electric Blue Acara. And yes, I know they'll dig I don't plan to have a ton of red plants, if any, in the tank, but I do want a light that has potential in that I can use it in any situation should I choose to redo/rescape the tank a few years down the road.

My requirements:

1. Must be able to be mounted via hanging kit/pendant mount
2. Dimmable
3. Usable App for initial setup with customizable channels - I typically loathe preset specs.
4. Reliable
5. Budget - nothing set in stone - but I would assume somewhere around $1,000.00 USD would be sufficient.

I'm an old school T5HO fan, but I thought I would change it up a bit for this tank and see what I am missing out on.

My current top choice is the Week Aqua (version 3) P900 Pro x 2.

I welcome any input on these specific lights (is 2 enough?) as well as any other lights that would be comparable and fit the criteria noted above.

I came into some Hygrophila polysperma "white" by Tropica recently. Grew it out and it seems to be able to be shaped into good midground bushes so I decided to create a layout to showcase it. Contemplated whether to use it as the only white plant in the tank, but decided to use some Anubias white petite as well so that the white polysperma doesn't stand out awkwardly.

THE official "what did you do to your tank(s) today" thread!​

Let's keep it real by sharing our daily routine. Post daily if you want. It's nice to check in with fellow aquatic gardeners.

Started a new tank with the idea of show casing Lagenandra meeboldii which I have not showcased before. Wanted to feature Hygrophila lower Hlaingbwe, but I removed it later as I think it would be too large for this tank.

New substrate, new filter, squeezed filter mulm from the other matured tank, then ran the tank one week day before planting. 100% water change after planting, then 100% water change every other day since then. Dosing 1ml APT3 after water change day, and remineralizing to 5dGH using APT Sky. Trying out the low water column dosing approach for the initial period.

Filter: Oase 250
Lights: Week aqua a430 80%
Substrate: APT Feast

Was going to Journal about startup issues, however, it seems like the tank has already stabilized, skipping diatoms and green dust phase.

Freshly planted for a couple of days:
13/2/2026


Replanted the tops for Myriophyllum roraima, Cut and replanted Rotala blood red to begin building up the bush form. Trimmed old leaves
Foreground seems a bit blocky for now, so I think I'lll move stuff round again. Probably when the BV grows out some more.
Pic on 23/2/2026

Readings at this stage:
Potassium: 2.3ppm
Ammonia: 0.1ppm

reduce water changes to 2 times a week.