Welcome to ScapeCrunch

We are ScapeCrunch, the place where planted aquarium hobbyists come to build relationships and support each other. When you're tired of doom scrolling, you've found your home here.

Social Feed

JayP
Supporting I Donated 2026 Rockstar
Last reply · posted in Aquascaping
Ok, adding substrate to my 75 gallon 120*45*50. This will be my first go at an entirely inert substrate using BDBS. 3 bags of medium grit have resulted in about 2.25 inches depth in front sloping to about 4 inches in the back. For those of you with "true" garden style tanks, does that seem like a good depth? Asking before I cut open another bag 😁 .
16 Replies · 1527 views
  • Like
Reactions: BenB
ample
· posted in Lounge
Saw a couple of you guys fighting for your lives over on Reddit. Valiant effort, but it’s just not the space for this hobby. Reddit will always be an open forum catering to the lowest common denominator. Nobody wants to see what years of focused practice produce, and will write off any decent aquascape or skilled plant husbandry as either having “thousands of dollars to spend” or just gatekeeping and elitism. Just let them have it. There’s no meaningful discussion to be had over there anyway.
0 Replies · 8 views
JCole
Last reply · posted in New to Planted Aquariums? Post Here
Hey everyone,

I'm Josh (JCole on most of the reef forums). I've been in the saltwater side of the hobby for over 20 years, mostly running Acropora-dominant systems. I'm officially getting out of reef keeping and converting my current tank to a planted freshwater tank. I'll be honest up front: I know almost nothing about planted tanks. So I figured the best move was to introduce myself, start a build thread, and beg for help LOL.

A little background so you know a bit about my previous addiction! :-)

For a long stretch, my main tank was a 150-gallon Acro tank plumbed to a sump, a 20-gallon chaeto refugium, and a frag tank out in the garage. I crashed it in late 2020, lost over 70 Acros, and kept about six. Rebuilt it and kept going.

1794500161411.webp
1794499237529.webp
1794499244365.webp
1794499254374.webp
1794499262941.webp
1794499274577.webp
1794499283775.webp
1794499298026.webp
1794499308857.webp
1794500278516.webp

I eventually outgrew the 150 with coral colonies and needed to upgrade. My next tank was a 480-gallon acrylic peninsula, 8'x4'x2', with a 300-gallon stock tank sump in the garage.

1794499646141.webp
1794499661797.webp
1794499747467.webp
1794500100108.webp
1794500354960.webp

The aquarium was a dream aquarium of mine, but with having a full time job running a company with 3 boys in travel ball baseball, it consumed all of my time and I just could not give the tank what it actually needed and deserved. I eventually reset it, built my own cement rock and shelves, and sold the whole system in early 2025.

1794500867450.webp



After that, I downsized to a Marineland 180 (72x24x24) in the same room. This is the tank I'm converting to freshwater.

1794501194278.webp

WHERE I'M AT RIGHT NOW
  • Tank: Marineland 180, 72x24x24, glass.
  • Goal: High-tech planted. CO2, good light, fertilizers, the whole thing.
  • Cleaning: Done. I stripped the tank and sump with bleach and muriatic acid to get all the coralline algae off. It's clean and ready for water.
  • Sump: My Trigger Triton 44 sump is already set up and staying. I'm not going canister right now.
  • Controller: I've run an Apex for about 8 years, and I also wrote my own Raspberry Pi controller app that talks to the Apex and my Kasa, Shelly, and Jebao gear.
  • Lights: I pulled the halides and kept the pendants. For now, each pendant has a 120V LED grow light bulb in it.
  • Substrate: I have 19 bags of CaribSea Eco-Complete Planted ready to go.
WHERE I NEED HELP AND FEEDBACK
  1. CO2 with a sump: I know a sump gasses off CO2. Since I'm keeping mine, what tips do you have to keep the loss down (lower the return, cover the sump, change the overflow, anything else)?
  2. CO2 control: I can run a solenoid and a pH probe off the Apex or my own app. Do you control CO2 by pH, by a timer, or both? Is a drop checker still the thing to trust? And what do you use to actually get the CO2 into 180 gallons—an inline reactor on the return or diffusers? What safeguards do you run so a stuck solenoid doesn't gas the fish overnight?
  3. Lighting: Are LED grow bulbs in the pendants enough for a high-tech 72" long, 24" deep tank, or is that a stopgap? If I upgrade, what would you put over it?
  4. Substrate and hardscape: I read that people put lava rock in filter bags on the bottom to build up hills and slopes so the deep rooting plants get more depth. Is that the way to do it, and how deep should the Eco-Complete be on top? Is 19 bags enough for what I'm trying to do?
  5. Fertilizers: EI or lean dosing for a first-timer? I'm used to dosing two-part and testing a lot, so numbers do not scare me.
  6. Plants and fish: I want to start with beginner plants, but I'm not scared to try the harder stuff. Acros taught me patience, so I'd like to work up to the more advanced plants. What would you start with in a 72" high-tech tank, and what would you add later? And what fish do well in that setup?
  7. Water: I've always run RODI for the reef. For planted, do I use straight tap, RO with remineralizer, or a blend? Which GH and KH numbers should I be shooting for?
  8. Cycling: Plants change how you cycle, right? What's the order of operations?
Fair warning, I'm a gear nerd and I tend to wing it, so feel free to tell me when I'm about to do something dumb. I'll keep this thread updated as I go.

Any help or guidance would be appreciated.

Thank you!!!

Will be continued!
99 Replies · 2291 views
Countrykingdom09
Last reply · posted in Journals
Hi. Have 3 tanks. 3 years of tank experience. 2 of keeping plants. I had some great success last year with all my plants, this year, ehh.

2 are cycled, the one is not but stores plants only. And a handful of bladder snails (rn at least).


10 Gallon planted WCMM tank:
Stocking: 6 wcmm, bladder snails
plants: Anubias, amazon sword, Val, dwarf sag, water sprite, moss ball, hornwort, and dwarf lily.
lighting and ferts: ACO EG ferts, nicrew light, nuthin to special. But it does the job. And working on A BUDGET.
HOB filter, PF sand. Rock planter for the anubias. Airstone. It has been set up for 2 years. Has had MANY MANY plants over that timeline!
20 Gallon planted community:
stocking: 6 harlequin rasboras, and bladder snails, ofc they hitchhiked lol.
plants: anubias, amazon sword, Val, dwarf sag, water wisteria, hornwort, moss ball, windelov java fern babies, tiger lotus.
lighting and ferts are the same.
Two sponge filters. PF sand. I plan to add more fish including...
honey Gourami
pygmy corydoras
green neon tetras
5 gallon hornwort tank:
Bladder snails, cheap topfin light, came with tank. Hornwort, a LEGO cave for fun lol. I grabbed the water from my 20 long. It was in storage for 2 plus years, but I have a LONGGGG story about my hornwort. It is not cycled.

More info later folks! Glad to be here, -whitecloud09
14 Replies · 2149 views
C
Last reply · posted in Fertilizing and Aquarium Chemistry
Has any one had any experience with Controsoil in an nitrate limited system? I'd like to color up my Rotala H'Ra more than it is now and have been keeping my NO3 at around, or slightly under 5PPM but still above 0 while slowing ramping up my lighting intensity so I don't knockout the balance of the system. I've got the usual nice salmon pink tips you usually get with this cultivar, but wouldn't mind getting it a bit more red as I continue to ramp up the light even brighter. I've read that in order to do so, you really need to get the NO3 to as close to 0PPM as possible (along with of course, bright light and optimal CO2). I'm just concerned about having hair algae exploding again, but this time from nutrient limitation after finally getting it under control for the opposite reason.

I know that Controsoil doesn't have anywhere near the same ammonium content as Amazonas, but was wondering if there was enough nitrate in it to sufficiently supply my H'Ra with NO3 through the roots so I could run the system close to 0PPM on NO3 without having to use root tabs. I'm getting conflicting info- some sources say there's effectively zero nitrogen content in Controsoil, but a video from Buce Plant on nitrate limited coloration specifically names UNS Controsoil as ideal for this method. Would be curious to see if anyone has any first hand experience, or has enough concrete info to settle this.
8 Replies · 123 views
Noahspapa
I Donated 2026
Last reply · posted in Planted Aquarium Discussion
It’s time to take down the 20 gallon long tank that was my first “ high tech planted” aquarium and upgrade to a tank with on an appropriate size/depth.

I’ll order a Landen (90 x 50 x 50) tank on Amazon for this. Free overnight delivery. Preposterous!

I’ve studied the thread TRyan posted on 3/4” plywood stands and will be building a stand for this - thank you TRyan!

For filtration, I’ve been studying JayP’s thread. I had a biomaster thermo 350 on the 20L which I’m thinking of reusing. And I also have a netlea prefilter sitting around and an ARC small acrylic yugang reactor I can steal from a tank. I’m thinking of buying an Oase 800 or other pump and chaining these pieces together to provide a second filtration/carbonizing path? Not sure on the pump manufacturer & size?

I’ll be putting this together in the style of the ADA nature aquarium. Aquasoil in the back, some hardscape (rock, wood) in the midground and a decorative sand foreground. Very simple. Primarily a guppy, Endler, Cory, pleco, neocaridina tank.

Soliciting the scapecrunch community for feedback, advice, suggestions, etc.

Thank you as always. You all are the best!
42 Replies · 2697 views
fishyjeff
Last reply · posted in Planted Aquarium Discussion
I noticed that MJAquascaping will be doing a seminar in Athens, GA. Here’s a link for anyone interested.

5 Replies · 174 views
renesis
Last reply · posted in Journals
Hi guys!

I'm new here, but not entirely new to planted tanks though I've been out of the hobby for the better part of the last decade between kids and moving a couple of times - but finally in a spot where I can do something again. I'm mostly going to be making things up as I go along, but plan on a lot of automation (I want to integrate everything into home assistant) and a lot of DIY as I love the challenge of building things out myself.

The starting point:

I picked up a 90P rimless, low-iron tank on a great deal.

Media (1).webp

I have a rough idea in my head for a stand to be built from plywood - just have a couple other house projects to finish off before starting that built.

Wife says I can only have one aquarium, so for this tank, I want to go all out with a sump to allow for auto top off, and auto water changes, auto fertilizer dosing etc. etc. I have half a plan in my mind.

I've also started on the light fixture which I've modeled up in CAD, and plan on making out of an 8020 extrusion, and some 3D printed bits.
Screenshot 2026-06-01 092809.webp
I'm using bridgelux gen 3 thrive CW (3000k) and WW (5000k) LED strips which have super high CRI at 98+ along with some specific XPE2 wavelengths that I'll solder onto some starboards. Far Red (730nm), Red (654nm), Cyan (495nm), Blue (455nm), Visible UV (415nm). Each segment of the white channels will be on its own driver so I can adjust left to right brightness in thirds, and each colour channel on its own driver so I can vary each channel on a time-based approach.

These will be run from a custom PCB board with Meanwell N-LDD drivers, and will run ESPHome on an ESP32 so it can link up with my Home Assistant installation.
1780321317096.webp

That's it for now, this will probably be a very slow build so be warned if you follow along!
102 Replies · 9375 views
Art
Art
Staff member I Donated 2026 Founding Member
· posted in Meet & Greet Forum

Hello  Welcome, gxtrex

Welcome to ScapeCrunch, @gxtrex!
We would love to get to know you. Please tell us about yourself. What tank do you have?
0 Replies · 14 views
BenB
Rockstar
Last reply · posted in Specific Plant Discussions
I mention this plant on occasion, but no one ever comments. So I thought I'd make a post for others and me for future reference.
It is my favorite Erio. It is a darker green, doesn't get too big, and for me it has never sent up any seed stalks.

I find it easy to grow. I have high light but nothing crazy at 124PAR and high CO2, 50+ppm. It gets about max 3-4" and makes side daughter plants when large. I'm not sure my dosing scheme is. Sort of an EI daily dosing kind of thing.

What gets me is every autumn, it starts to melt. I'm not sure how it knows it's autumn with consistent light and a heater, but it must get a little cooler in the tank or something. The plant starts to turn brown and sends up (I'm not sure of the correct term) vegetative stalks with little plantlets on the ends. I've found you can plant these stalks into the substrate with the plantlet on top, and it will grow into a new plant. They've been easy to grow. This is the third year this has happened to me.
Pic of plantlets below. I'll try to get a better one sometime. All I had time for tonight was a crappy phone pic.

This year I divided one of the mother plants in hopes that it wouldn't fully melt and would regrow. That is still in progress.

Anyone else's experiences are welcome.

DSC09694a.webp

This plant is the same plant as the one on the right above.
20261006_182513a.webp
16 Replies · 1117 views
NC AL
Last reply · posted in Journals
NC AL’s Waterbox 20g AIO Planted Tank

Current view as of 5/26/26

IMG_1144.webp​

Tank: Waterbox 20 AIO
Return pump: AI Axis 40
Lighting: (2) AI Blade Fresh 12”
Dosing pump: Ecotech Marine
CO2 injected

The purpose of this tank is to maintain a healthy planted tank for at least 1 year. There is a stipulation that I must be able to do this using my tap water for water changes.
75 Replies · 5988 views
Back
Top