Social Feed

I know stainless isn't 100% impervious to rust, but I try to let my tools dry out after use and mine have a bit of rust.
I'm frustrated because.... you know.... we all want pretty tools.
I thought I had quality stuff, but now I'm not sure, or I didn't let them dry good a few times.
Do yours rust or do I have tools?

Amazon prime day is less than 2 weeks away so I thought I'd start a thread in advance to discuss any bargains we might see.

The reason this came to mind now was that I just happen to be browsing for other things when I noticed this small curved edge low iron tank pop up. I would probably buy one of these if it drops even lower for prime day.

10 Gallon Ultra Clear Glass Rimless Curved Edge Aquarium

I came into some Hygrophila polysperma "white" by Tropica recently. Grew it out and it seems to be able to be shaped into good midground bushes so I decided to create a layout to showcase it. Contemplated whether to use it as the only white plant in the tank, but decided to use some Anubias white petite as well so that the white polysperma doesn't stand out awkwardly.

Hi guys!

I'm new here, but not entirely new to planted tanks though I've been out of the hobby for the better part of the last decade between kids and moving a couple of times - but finally in a spot where I can do something again. I'm mostly going to be making things up as I go along, but plan on a lot of automation (I want to integrate everything into home assistant) and a lot of DIY as I love the challenge of building things out myself.

The starting point:

I picked up a 90P rimless, low-iron tank on a great deal.



I have a rough idea in my head for a stand to be built from plywood - just have a couple other house projects to finish off before starting that built.

Wife says I can only have one aquarium, so for this tank, I want to go all out with a sump to allow for auto top off, and auto water changes, auto fertilizer dosing etc. etc. I have half a plan in my mind.

I've also started on the light fixture which I've modeled up in CAD, and plan on making out of an 8020 extrusion, and some 3D printed bits.

I'm using bridgelux gen 3 thrive CW (3000k) and WW (5000k) LED strips which have super high CRI at 98+ along with some specific XPE2 wavelengths that I'll solder onto some starboards. Far Red (730nm), Red (654nm), Cyan (495nm), Blue (455nm), Visible UV (415nm). Each segment of the white channels will be on its own driver so I can adjust left to right brightness in thirds, and each colour channel on its own driver so I can vary each channel on a time-based approach.

These will be run from a custom PCB board with Meanwell N-LDD drivers, and will run ESPHome on an ESP32 so it can link up with my Home Assistant installation.


That's it for now, this will probably be a very slow build so be warned if you follow along!

Tried to open the app to change a setting. Goes to a login screen. Checked Chihiros support, and it seems to be an issue with the latest version of the app. The issue appears to be widespread.

Discussion on the Chihiros site.

This is the future home for the announcements when someone obtains an achievement badge. Let the games begin!

I'd like to hear other people's thoughts on using pH drop to estimate CO₂ levels.


I'm in a rather strange situation. First of all, I use two good-quality digital pH meters, both properly calibrated and well maintained. I've been using this type of equipment for years because, before getting into aquariums, I was (and still am) heavily involved in hydroponics.


Anyway, here's the situation:


My fully degassed pH (water left degassing indoors for 72 hours) is 7.6. I know that degassing indoors theoretically results in a higher equilibrium CO₂ concentration than the commonly referenced 0.6 ppm achieved outdoors, but let's use that as a reference point.


With CO₂ running, the aquarium reaches a pH of 5.6, giving me a pH drop of 2.0.


Using the standard ph drop relationship and assuming 0.6 ppm CO₂ at equilibrium, that would suggest roughly 60 ppm CO₂.


However, both on this forum and in various Facebook groups, I often see people reporting pH drops of around 1.0–1.4. Some have even claimed to measure about 60 ppm CO₂ with a Hanna meter while having only a 1.4 pH drop, using water degassed outdoors.


If that were true, then extrapolating from those numbers would suggest that my tank is running at something like 240 ppm CO₂, which seems highly unlikely. My fish appear perfectly fine, and my drop checkers aren't even yellow. In fact, I have three different drop checkers in the tank, using different indicator solutions and placed in different locations, just out of curiosity.


So I'm wondering:

• Do you think the pH drop method is being misinterpreted by many hobbyists?
• Could there be something fundamentally wrong with the assumptions behind comparing pH drops between different tanks?
• Has anyone here measured dissolved CO₂ directly and compared it against pH drop calculations?

I'd really be interested to hear your thoughts on this rather confusing situation.

THE official "what did you do to your tank(s) today" thread!​

Let's keep it real by sharing our daily routine. Post daily if you want. It's nice to check in with fellow aquatic gardeners.

I've just spotted these latest Hygger luminaire lights.

All the bumf seems to claim that they only have RGB LEDs (all 5054 type). Very reasonable prices. Is this a complete bargain for a genuine RGB light ? Or is there a catch ?? THis is way off my areas of expertise.

Welcome to ScapeCrunch, @Stonedwriterbagel!
We would love to get to know you. Please tell us about yourself. What tank do you have?